Advertisement
4. Adjustment of the front disc brakes.
If the front wheel does not turn without noise, then follow these instructions:
5. Mounting the Pedals
CALIPER PAD ADJUSTMENT
1. Turn the front knurled wheel that is located
in the center of the lever arm clockwise to move
the outer pad inwards towards the rotor.
2. Spin the wheel and let it rotate as you turn
the rear adjuster clockwise direction until it just
touches the rotor.
3. Turn the knurled adjuster clockwise to achieve
the desired amount of brake lever travel.
The pedals are clearly marked with an R and L
for right and left.
Screw the pedal into the crank arm tightly.
3
Advertisement
