Water Intake Fault - Miele G 6500 Operating Instructions Manual

Frequently Asked Questions

Water intake fault

Problem
One of the following
fault messages is dis‐
played:

Open water supply

Intake
The following message
appears in the display
during the
Energy Saver
program:

Intake temp. low
70
Possible cause and solution
The water supply is turned off.
 Turn on the water supply all the way.
Before fixing the fault:
 Turn the dishwasher off with the  button.
There is a problem with the water intake.
 Turn on the water supply fully and start the pro‐
gram again.
 Clean the water intake filter (see "Frequently asked
questions").
 The water pressure at the intake is lower than 4.35
psi.
Contact a plumber.
The intake water has not reached the required tem‐
perature of 120°F (45°C) (see "Water connection -
Water intake").
 Start the program again.
 If the fault message appears again, select a differ‐
ent program.