Cutlery; Cutlery Tray (Depending On Model) - Miele G 6500 Operating Instructions Manual

Loading the dishwasher

Cutlery

3D cutlery tray (depending on model)
 Arrange the cutlery in the tray as
shown.
To make unloading much easier, cutlery
should be grouped in zones, one for
knives, one for forks, one for spoons,
etc.
Spoon heads should be placed in con‐
tact with at least one of the serrated re‐
tainers on the base of the cutlery tray to
ensure that water runs off them freely.
The upper spray arm must not be
blocked by items which are too big.
The side sections of the tray can be
moved into the middle to accommodate
tall items of dishware in the upper bas‐
ket.
40
If spoon handles do not fit between the
holders, lay them the other way round.
You can use the yellow slide to adjust
the height of the middle section of the
cutlery tray to make more room for
large items of cutlery, such as serving
spoons and ladles.