Table of Contents
Advertisement
TrouBLe ShooTInG Q & a
Most of the troubleshooting issue can be easily solved. The common cases and the
respective solutions are listed in the table below. If the problem is not listed or not
shown below please contact technical support.
Problem
No Picture,
No Audio
The number of DVB-T
channels is not was
expected
All channels show
"No Signal" or random
mosaic tiles appear
on the display.
The video is fine
but there is no sound
The power LED is
flashing.
Possible reason
The Batteries are totally discharged.
The power cable is properly
connected to the device.
The Device is not switched on.
The number of available channels is
limited to the number of channels
broadcast in a given area.
The signal quality of some channels
is too low
Some TV channels are not available
Some TV channels signal quality
is too low.
Wrong antenna is used
No DVB-T service is provided in the area
The volume is too low
The audio is muted
The battery power is too low
Solution
Replace batteries with new ones
Check the power lead connection.
Confirm that the adaptor has power.
Slide the "Power Switch" to the "ON"
position.
Perform "Auto Search" or "Manual
Search" to rescan all channels.
Use the external antenna to increase
the reception sensitivity. For Indoor
use, place the antenna on a high point
close to a window.
Only the locally broadcast channels
can be viewed. They can differ from
area to area.
Use the external antenna to increase
the reception sensitivity. For Indoor
use, place the antenna on a high point
close to a window
Use only the external antenna provided
with this device
Check the DVB-T coverage in your area.
Click the "VOL +" button to raise the
volume
Click the "MUTE" button to disable the
mute function.
Connect the TV to an external power
source or replace the batteries
1
Advertisement
Table of Contents
