Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Laser DVBT-C30
Summary of Contents for Laser DVBT-C30
- Page 1 DVBT-C30 User Manual Please read carefully before use...
-
Page 2: Important Instruction And Precaution
DVBT-C30 User Manual ImporTanT SafeTy InSTruCTIonS anD preCauTIonS • Read the instructions carefully before using this product. • Observe all warnings and cautions when using this product. • Retain all manuals and documentation for future referral. • Only use this product in a manner described in this manual. • Do not use this product if you are in control of a motor vehicle. • If used in a motor vehicle it should be used away from the driver to avoid distraction. • This device is not waterproof. Do not use this device in extremely hot, cold, humid, dusty or sandy environments. • Do not use this device in electrical storms or other conditions if the likelihood of lightning is possible. • Do not attempt to clean this product using liquid cleaners or aerosol cleaners. Use only a damp soft cloth to clean the surface of this device. • Extreme care should be taken when using this product near any body of water such as swimming pools, kitchen sinks, baths and alike. • Only place the device on a stable surface and ensure that cables attached to the device can not cause the device to fall. • Only use the recommended accessories for this device. Use of incorrect accessories may cause damage and void the warranty. - Page 3 • Use only the recommended batteries in this device. The use of incorrect batteries may cause damage to the device or injury to the user. • Using this device near other electronic devices may cause interference. Please use care using this product near other devices. • Remove batteries from device if it is not to be used for long periods. Damage caused by leaking or faulty batteries is not covered by warranty. • Care should be taken when using the external antenna. Please remove the fitting carefully from the device. Do not pull at the cord to remove it. • Ensure that the ventilation holes are not blocked when using this device. Heat build up may cause this device to fail. • There are no serviceable parts in this device. Attempts to open this device by unauthorised personnel may cause further damage and void the warranty. • Picture quality will be dependant on signal quality and strength. This device may not be able to pick up all stations in all areas. For best results, use in a strong signal area and ensure that the antenna has a clear unobstructed view of the sky.
-
Page 4: Table Of Contents
DVBT-C30 User Manual TaBLe of ConTenTS Important instruction and precaution ..........2 Table of contents . -
Page 5: Accessory List And Connection Guide
aCCeSSory LIST 1. AC/DC Power adaptor 2. AV cord 3. Earphone 4. External Antenna 5. Battery Pack (NOT SHOWN) 6. MCX-to-ICE cable 7. Remote Control ConneCTIon GuIDe... -
Page 6: Preparing The Battery Pack For Use
DVBT-C30 User Manual preparInG The BaTTery paCk for uSe The battery pack allows the TV to be used with out the AC adaptor Make sure that the batteries used in the pack are fully charged and are in good condition. Rechargeable batteries can be used but not charged in this pack. aTTaChInG The BaTTery paCk Fit 4 X AA Size batteries to the pack as shown. Match the batteries to the images in the pack. Locate the top of the battery pack and hold upwards. Position the pack on the back of the DVT. Push the battery pack downwards until the pack locks in place. Makes sure the pack is locked in place before using the DVT. To remove the battery pack from the DVT, locate the locking tab at the top of the pack and press in. Push the pack upwards until tabs are clear of the DVT. -
Page 7: Knowing Your Dvt
knowInG your DVT 1 Antenna 2 LCD panel 3 Power LED (LED will glow green if in use) 4 IR Sensor 5 Menu/Exit Button 6 OK/Mute button 7 Multi Selector (VOL & Channel) 8 Speaker 9 Battery Connector terminal 10 Eyelet for lanyard (Not Supplied) 11 Earphone/Audio out Socket 12 Video output socket 13 DC power connecter socket 14 Power ON/OFF Switch 15 External Antenna connector... -
Page 8: Basic Operations
DVBT-C30 User Manual BaSIC operaTIon... -
Page 9: Using The Main Menu
uSInG The maIn menu In the main Menu Mode you can highlight the service type, program list, preview, audio channel, program editing, program info, automatic search, manual search, and system setting to enable the related function. You can use the [CH +], [CH - ], [VOL+], and the [VOL - ] buttons to navigate around the menu. When the required item is highlighted, press the [OK] button to select. Service Type Selection of DVB-TV or DVB-T Radio or FM Radio Program list Program List To show the information of all the available channels. Preview To Preview up to 9 selected channels Audio Channel Selection of either master or secondary language Program Editing To arrange the TV channels in the program table via the “Delete”, “Skip”, or “Reorder” function. Program Info To provide the TV program information about the system parameters and signal information Automatic Search To search the program channels automatically Manual Search To search the program channels manually System Settings To configure the system settings. Please see further for detailed information. -
Page 10: Main Menu In Detail
DVBT-C30 User Manual maIn menu In DeTaIL Program List (EPG, Electronic Program Guide) 1) In menu mode, select “Program List” 2) Press the [OK] button to show all the available channels. 3) Press the [CH +] and [CH-] buttons to choose any channel. 4) Press the [VOL -] button to show details of the channel 5) Press the [Menu] button to exit. Preview 1) In Menu mode select “Preview”. 2) Press the [OK] button to show 9 channel shots 3) Press [CH +]/[CH -]/[VOL +]/[VOL -] buttons to select the preview and press the [OK] button to watch the channel. 4) Press the Menu Button to exit. Audio 1) In Menu mode, select “Audio Channel”... - Page 11 Program Editing 1) In menu mode, select “Program Editing” 2) Press the [OK] button to show the program edit table. 3) Press the [CH+]/[CH-] button to select the channel. 4) Press the [VOL+]/[VOL-] button to select the skip channel, delete channel, or move channel sequence function. 5) Press the [OK] button to skip channel, delete channel, or change the channel number. 6) Press [MENU] button to exit Program Info 1) In menu mode, select “Program Info”. 2) Press the [OK] button to show the program information. 3) Press the [MENU] button to exit Automatic Search 1) In menu mode, select “Automatic Search” 2) Press the [OK] button. 3) Press the [CH-] to select “OK”. 4) Press the [OK] button to start the channel search. 5) Press [MENU] button to exit...
-
Page 12: Fm Radio
DVBT-C30 User Manual Manual Search 1) In menu mode, select “Manual Search” 2) Press the [OK] button to show the manual search screen. 3) Press the [VOL-]/[VOL+] button to adjust the Channel 4) Press the [CH-] button until the “OK” is high- lighted. 5) Press the [OK] button to start the target chan- nel Searching. 6) Press the [MENU] button to exit. fm raDIo Reminder: Ear phones should be connected for better FM reception. Tuning FM programs 1) In menu mode, select “Service Type”. 2) Press the [OK] to find the FM radio service. - Page 13 Saving Your favourite FM Stations 1) Press [Menu] to toggle between tuning and the radio menu. 2) Press [CH-] to move the cursor to the “Store” button. 3) Press [OK] to activate favourite list. 4) Press [CH+]/[CH-] to adjust preferred favourite location. 5) Press [OK] to store current frequency to preferred favourite location. Loading Your favourite FM Stations 1) Press [Menu] to toggle between tuning and the radio menu. 2) Press [OK] to activate the favourite list. 3) Press [CH+]/[CH-] to select a stored favourite location. 4) Press [OK] to start hearing selected favourite station or press [Menu] to cancel loading favourites. Return to TV Service 1) Press [Menu] to toggle between tuning and the radio menu.
-
Page 14: System Setting
DVBT-C30 User Manual SySTem SeTTInGS Setup Wizard Quickly set up with aid of step by step onscreen instructions. Brightness To adjust the screen brightness Aspect ratio Changes the aspect ratio of the TV display 16:9 or 4:3 Subtitle Language Select the subtitle language (if Broadcast) Antenna Selection Select the antenna source switch between internal antenna, external antenna or Auto switching. TV System Select the required TV system to be displayed. PAL/NTSC/AUTO Regional Settings Select the region you are currently located in. OSD Language Select the Language of the On Screen Display. Time Zone Set the Time zone and local time. - Page 15 Setup Wizard 1) In system setting, select “Setup Wizard” 2) Press the [OK] button. 3) Press the [VOL+]/[VOL-] button to choose the item. 4) Press the [OK] button to select 5) Press the [MENU] button to exit Subtitle Language 1) In system setting, select “Subtitle language” 2) Press the [OK] button to start the searching 3) After the searching, press [CH-]/[CH+] to choose the language. 4) Press the [OK] button to select. 5) Press the [MENU] button to exit. Regional Setting 1) In system setting, select “Regional Setting” 2) Press the [OK] button. 3) Press the [CH-]/[CH+]/[VOL+]/[VOL-] button to choose the country. 4) Press the [OK] button to select. 5) Press the [MENU] button to exit.
- Page 16 DVBT-C30 User Manual OSD (On Screen Display) language 1) In system setting, select “OSD Language”. 2) Press the [OK] button. 3) Press the [CH-]/[CH+] buttons to choose the Language. 4) Press the [OK] button to select. 5) Press the [MENU] button to exit. Brightness 2) Press the [OK] button. 3) Press the [VOL+]/[VOL-] buttons to adjust the brightness level of the display. 4) Press the [OK] button to select. 5) Press the [MENU] button to exit. Time Zone 1) In system setting, select “Time Zone”. 2) Press the [OK] button. 6) Press the [VOL+]/[VOL-] buttons to adjust the time. 7) Press the [OK]/ [MENU] button to select.
-
Page 17: Quick Setup
QuICk SeTup There are two ways to setup the start the instillation wizard. I. Press the [OK] button for 5 seconds 1) After pressing the [OK] button for 5 seconds, the unit will be re-started and display the message shown right. 2) Press the [VOL-] button to select “OK” item 3) The “Setup Wizard” will be shown. 4) Set the OSD Language, Region, Time Zone, and then start the automatic search. 5) When all stations are detect the Setup Wizard is complete. II. Go to the main Menu -> System Setting -> Setup Wizard 1) Set the OSD Language, Region, Time Zone, and then start the automatic search. 2) When all stations are detect the Setup Wizard is complete. -
Page 18: Connecting To A Tv
DVBT-C30 User Manual ConneCTInG To a TV SeT Please familiarise your self with the manual of any equipment you plan to connect this device to. Ensure that the power is off on equipment you are connecting this device to before connecting it. notice Do not connect this device through a Video Cassette Recorder, VD recorder or PVR when setting up your home entertainment system. Picture may not be displayed correctly because of Copy Protection signals embedded in the TV signal. If your TV set does not have the correct A/V inlet plugs it may be necessary to source an RF Modulator through your Local Electronics store. -
Page 19: Trouble Shooting
TrouBLe ShooTInG Q & a Most of the troubleshooting issue can be easily solved. The common cases and the respective solutions are listed in the table below. If the problem is not listed or not shown below please contact technical support. Problem Possible reason The Batteries are totally discharged. The power cable is properly No Picture, connected to the device. No Audio The Device is not switched on. The number of available channels is limited to the number of channels broadcast in a given area. The signal quality of some channels The number of DVB-T is too low channels is not was expected Some TV channels are not available Some TV channels signal quality is too low. All channels show “No Signal” or random mosaic tiles appear Wrong antenna is used on the display. No DVB-T service is provided in the area The volume is too low The video is fine but there is no sound The audio is muted The power LED is The battery power is too low... -
Page 20: Specifications
DVBT-C30 User Manual SpeCIfICaTIonS Display • Antenna • Speaker • Video Output • Audio Output • Controls • OSD Languages • Features • Power supply • Battery • Operating time • Dimensions • Weight • Technical • support 3.5” COLOUR TFT-LCD 320(W)x 240(H) Built-in telescopic antenna for UHF band reception Built-in 0.5W/8Ω...