Recording, Archiving & Streaming; Recording & Streaming; Disabling/Enabling Multicast; Changing Profiles - Media Pointe HD PORTAL User Manual

4
Recording, Archiving & Streaming
Recording and Streaming
A streaming/recording session can be started and
stopped from the Start/Stop section of the main toolbar
and from the Profile listing. The "default" Profile will
be used unless another Profile is selected. To select an
alternate Profile, use the Change button to bring up a
Profile listing.
The web interface will display a "Recording" message
at the top of the page. The record/stream parameters
will be as specified in the Profile that was chosen.
To stop the recording and create an archived file,
press the Stop button to begin the "indexing" process.
Depending on the length of the archived material,
this could take a few seconds up to several minutes to
complete.
Disabling / enabling multicast
By default, the HD Portal will multicast anytime a
Profile is initiated with streaming enabled. Multicast
can be disabled so only unicast streams will be
available. To disable multicast, access the CLI and enter
the "multicast off" command.

Changing Profiles

On the Start/Stop page, you can click on the Change
icon and you will get a list pop-up with all available
Profiles. Select on the Profile of your choice and the
Start/Stop page will automatically be updated.
Content Detail
13
HD Portal |