Folder Management Table; On-Screen Menu/ Front Control Panel; External Control - Media Pointe HD PORTAL User Manual

Table of Contents

Advertisement

Folder Management Table

Icon
Function
Show Folders
Displays the folder management tree .
Allows content to be moved from one folder
Move to
to another .
Allows a copy of a media file to be created in
Copy to
a different folder .
Deletes the selected content . There is no
Delete Selected
recycle bin or recovery process for content
that has been deleted .
Download to
Opens the Download Manager to allow
my PC
content to be moved to the local PC .
Description
On-Screen Menu
The On-Screen Menu is displayed on the VGA (RGBHV) or
HDMI output of the HD Portal. The HD Portal handheld
IR remote will access some of the configuration features
of the web interface as well as provide the ability to
navigate and playback non-password protected content.
The on screen menus give the user the following
capabilities:
Start/Stop Recording
Browse and Play non-password protected
content
Browse and Play recent content
Copy content to USB
Display test images and tones
Set audio input recording level
Adjust the Menu opacity, position and time out
Retrieve System Information

External Control

RS-232
On the back of the HD Portal there is a single control
port configured as a DTE that supports the RS-232
protocol. A Null-Modem cable should be used between
the HD Portal and the COM port on your PC – the pin-out
is shown here.
DB-9 Female
Function
2
Rx to Tx
3
Tx to Rx
5
Signal Ground
Terminal session settings required for RS-232 control
are: 9600, 8, None, 1 with No Flow Control.
There is no password protection on this interface and,
by default, the RS-232 port is not enabled. However,
the administrator has the ability to enable the serial
control port from the web interface.
11
HD Portal |
DB-9 Female
3
2
5

Advertisement

Table of Contents
loading

Related Products for Media Pointe HD PORTAL

Table of Contents