Login Page - Fig . 1; As An Administrator; Changing Administrator Password - Media Pointe HD PORTAL User Manual

FIGURE 1 - LOGIN PAGE

As an Administrator

The Administrator maintains all rights to the HD Portal.
1. If you are already logged into the HD Portal as a user
or author, click on the LOG OUT selection at the top
of the main menu. You will be prompted to enter a
username and password.
2. Use the login id "admin". The default password
is "MediaPOINTE". Note that the login id and the
password are case sensitive.
3. From the User Security selection of the main menu,
the Administrator can enable or disable logins for users
and authors and can change the admin password.
Changing the Administrator Password
Administrator rights are required to access or change
any of the settings under the "Configure" and "Manage"
sections in the main menu. These sections include:
Config IP, Security, Update, and System Information.
By default, the Administrator ID and password are set
to "admin" and "MediaPOINTE" respectively. It is not
possible to change the Administrator ID. It will always
be "admin".
Setup
Use this information when you first purchase the HD Portal
and when you are ready to install the hardware at your site.
This section shows the back panel and explains how to connect
the separate input connections to the unit.
To change the Administrator password, enter a new
Administrator password in the "New admin Password"
field (10 characters maximum) and confirm it by going
to the User Security webpage and clicking on the
Change Admin Password button. The next time the HD
Portal is accessed, the new admin password will take
effect.
Be sure to write down the new administrator password
and keep it in a safe place. If you forget the admin
password, the HD Portal will have to be reset back
to the factory defaults to enable an administrator to
access the "Configure" and "Manage" sections of the
unit.
5
HD Portal |