Low voltage power supply (LVPS) removal
See
"Low voltage power supply, 115/230 V" on page 7-7
4.
Remove the five LVPS mounting screws (B).
5.
Disconnect the cable from the LVPS (C).
6.
Remove the cable from the cable guide, and remove the LVPS.
1.
Remove the right side cover. See
2.
Remove the rear cover. See
3.
Unplug the JLVPS1 connector (A) from the system card.
C
for the part number.
"Right cover removal" on page
"Rear cover removal" on page
A
5022-xxx
4-26.
4-25.
B
4-65
Repair information