Sprint Treo 600 Manual page 16

Connecting
2
Connecting Treo to Your Computer
IMPORTANT: If you're upgrading from another Palm Powered device, follow the upgrade steps
on page page 149 before you set up your computer for your new Treo.
1. Plug the AC charger into a wall outlet. If necessary, connect an adapter.
2. Connect the charger to the short end of the HotSync cable. Be sure to match
the sides of the connectors labeled UP.
3. Plug the USB HotSync cable into an available USB port or a powered USB hub
on your computer.
4. Connect the long end of the HotSync cable to the bottom of your Treo with
the button facing up. Do not press the HotSync button until you are instructed
to do so in the next step.
20
USB Cable
3
Installing Palm Desktop Software on Your Computer
Your computer needs to have all its resources available to install the software.
Follow these guidelines for a successful installation:
1 If you are installing on a computer at work, make sure your company allows
you to install new software. Contact your company's IT department for help.
2. Exit any applications that are currently running on your computer, including
those running in the background.
3. Insert the CD that came with your Treo into the CD-ROM drive on your
computer. If you are installing on a Macintosh, double-click the CD icon on the
desktop, then double-click the Installer icon.
4. Follow the onscreen instructions of the installation program. Click Install
Synchronization Software to install the Palm Desktop software. During the
installation process, you will be prompted to synchronize for the first time.
HotSync
Button
21