Table of Contents
Advertisement
Multi-Brand Control Feature
Multi-Brand Control Setup
The Remote Control can be set to control certain Televisions.
1
Find your TV Brand Code Number on the following
page.
2
Set up for TV control,
➛ ➛ ➛ ➛ ➛ hold down TV button,
➛ ➛ ➛ ➛ ➛ enter code with NUMBER keys.
3
Confirm code entry,
➛ ➛ ➛ ➛ ➛ press POWER to turn selected unit on or off.
• See table below for controllable functions in each mode.
Notes
• Repeat setup after remote battery replacement.
• Remote will not control every TV made by the
manufacturer listed. If you get no response, your particular
unit cannot be controlled.
There are NO additional codes for the products listed. If
your product is not listed, then the remote is not
compatible with that product.
Using Multi-Brand Control
After remote is set up, you can select VCR, DVD, or TV
for the desired function.
Press VCR, DVD , or TV on the remote.
(Table below shows available remote buttons for each mode.)
Unit
Mode
DVD
VCR
EJECT/ OPEN/CLOSE *, DISPLAY , PLAY ,
STOP , FF/SLOW+ , REW/SLOW- ,
TV
VCR/TV, PAUSE /STILL , SKIP , AUDIO ,
CM/ZERO, SPEED, REC, TAPE
POSITION, PAGE , COUNTER RESET
Notes
• Not all functions listed may be controllable.
• In TV mode, it may be necessary to press ENTER after pressing NUMBER keys for channel selection.
28
AG-VP320-3(VCR)_24-35.p65
DVD/VCR
All
* Bold : VCR Function
Italic : DVD Function
28
TV
VOL +/-
POWER, INPUT, NUMBER keys,
ENTER, CH
/ , VOL +/-
Bold Italic : VCR and DVD Functions
Normal
: TV
2005/05/18, 16:11
Advertisement
Table of Contents
