Multi-Brand Control Feature - Panasonic OmniVision PV-D4745 Operating Instructions Manual

Multi-Brand Control Feature

Multi-Brand Control Setup
The Remote Control can be set to control some Televisions.
1
Find your TV Brand Code Number on the
following page.
2
Set up for TV control,
➛ ➛ ➛ ➛ ➛ hold down TV button,
➛ ➛ ➛ ➛ ➛ enter code with NUMBER keys.
3
Confirm code entry,
➛ press POWER to turn selected unit on or off.
• See table below for controllable functions in each mode.
• Repeat setup after remote battery replacement.
Notes
• Remote will not control every TV made by the
manufacturer listed. If you get no response, your
particular unit cannot be controlled.
There are NO additional codes for the products listed.
If your product is not listed, then the remote is not
compatible with that product.
Using Multi-Brand Control
After remote is set up, you can select VCR, DVD, or TV
for the desired function.
Press VCR, DVD , or TV on the remote.
(Table below shows available remote buttons for each mode.)
Unit
Mode
DVD
VCR
EJECT/ OPEN/CLOSE
PLAY , STOP , FF/SLOW+ , REW/SLOW- ,
VCR/TV, PAUSE /STILL , SKIP , AUDIO ,
TV
CM/ZERO, SPEED, REC, TAPE
POSITION, PAGE , COUNTER RESET
Notes
• Not all functions listed may be controllable.
• In TV mode, it may be necessary to press ENTER after pressing NUMBER keys for channel
selection.
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
28
DVD/VCR
All
*
, DISPLAY ,
*
Bold: VCR Function
Italic: DVD Function
TV
+
VOL
POWER, INPUT, NUMBER keys,
ENTER, CH / , VOL
Bold Italic: VCR and DVD Functions
Normal: TV
-
/
+
-
/