Table of Contents
Advertisement
*Important: If a remote control button does not work when pressed,
Audio Mode for Recording
1
Press AUDIO (SAP/Hi-Fi)
to display audio mode.
(Display disappears after 5 seconds.)
2
Press AUDIO (SAP/Hi-Fi)
repeatedly to select desired mode.
• Refer to "Receivable Broadcast Types"
on p. 26.
• Arrow indicates selection.
3
Make a recording.
See p. 21.
Audio Mode for Playback
1
Start playback.
See p. 20.
2
Press AUDIO (SAP/Hi-Fi)
to display audio mode.
3
Press AUDIO (SAP/Hi-Fi)
repeatedly to select desired mode.
• Select "HIFI (L/R)" or "HIFI (L)" or "HIFI
(R)" to listen to stereo recordings in
stereo sound.
Select "NORMAL" for monaural sound.
• Display disappears after 5 seconds.
• Arrow indicates
selection.
Notes
• Only tapes recorded in Hi-Fi stereo will playback with true stereo sound.
Standard stereo tapes will playback in monaural sound.
• To listen to Hi-Fi stereo playback, the DECK AUDIO (L/R) jacks must be connected to a stereo TV or an
external stereo amplifier and speakers. (See pp. 12, 14.)
• If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio.
• Hi-Fi and normal audio playback volume level may differ.
AG-VP320-3(VCR)_24-35.p65
press the VCR button on the remote and try the button again.
27
2005/05/18, 16:11
27
Advertisement
Table of Contents
