Table of Contents
Advertisement
Drive A and Drive B : Select the correct specifications for the diskette drive(s) installed in the
computer.
None
360K
5.25 in
1.2M,
5.25 in
720K
3.5 in
1.44M,
3.5 in
2.88M,
3.5 in
Note : 1.
Not Installed could be used as an option for diskless workstations..
2.
Highlight the listing after each drive name and select the appropriate entry.
Halt On : During the power-on-self-test (POST), the computer stops if the BIOS detects a
hardware error. You can tell the BIOS to ignore certain errors POST and continue the boot-up
process. These are the selections:
No errors
All errors
All, But Keyboard
All, But Diskette
All, But Disk/Key
No diskette drive installed
5-1/4 inch PC-type standard drive; 360 kilobyte capacity
5-1/4 inch AT-type high-density drive; 1.2 megabyte capacity
3 1-2 inch double-sided drive; 720 kilobyte capacity
3 1-2 inch double-sided drive; 1.44 megabyte capacity
3 1-2 inch double-sided drive; 2.88 megabyte capacity
Whenever the BIOS detects a non-fatal error the system will not be
stopped and you will be prompted
The system boot will be stopped for any error that may be detected.
The system boot will not stop for a keyboard error ; it will stop for all
Other errors.
The system boot will not stop for a disk error ; it will stop for all other
Errors.
The system boot will not stop for a keyboard or disk error ; it will stop
for all other errors.
Advertisement
Table of Contents
