Lanner electronics FW-6420 User Manual page 24

- Installing Hard Disk Drive
Step 1: Take off four screws from the hard disk bracket.
Step 2: Moving the hard disk bracket.
Step 3: Insert the hard disk in the bracket and screwing four screws with the hard disk
together from both sides.
Step 4: Install the 44-pin hard disk cable to the hard drive and screw four screws in the
hard disk bracket.
Step 1
- Installing Compact Flash Card
Step 1: Insert the compact flash card into the slot carefully as shown in the picture.
Step 3
Step 4
Step 1
Step 2