Download  Print this page

Philips 19PFL3504D/F7 Service Manual

Lcd tv
Hide thumbs

Advertisement

Service Manual

19"
19"
19"
22"
22"
© 2009 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed,
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written
consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto
is strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content
herein without the obligation to notify any person or organization of such changes.
with the
without the express written consent of Funai. All other trademarks used herein remain the exclusive property of
their respective owners. Nothing contained in this manual should be construed as granting, by implication or
otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any
other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights
to the fullest extent of the law.
19PFL3504D/F7
19PFL3504D/F7
19PFL3504D/F7
22PFL3504D/F7
22PFL3504D/F7
design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way
chassis FL9.0
Contents
(Serial No. : DS1A**********)
(Serial No. : DS2A**********)
(Serial No. : DS3A**********)
(Serial No. : DS1A**********)
(Serial No. : DS2A**********)
A91N2UH/A9172UH/A91NAUH/A9175UH/A9ANAUH
LCD TV
091001

Advertisement

loading

  Related Manuals for Philips 19PFL3504D/F7

  Summary of Contents for Philips 19PFL3504D/F7

  • Page 1: Service Manual

    LCD TV chassis FL9.0 Service Manual Contents 19” 19PFL3504D/F7 (Serial No. : DS1A**********) 19” 19PFL3504D/F7 (Serial No. : DS2A**********) 19” 19PFL3504D/F7 (Serial No. : DS3A**********) 22” 22PFL3504D/F7 (Serial No. : DS1A**********) 22” 22PFL3504D/F7 (Serial No. : DS2A**********) © 2009 Funai Electric Co., Ltd.
  • Page 2: Important Safety Notice

    IMPORTANT SAFETY NOTICE Proper service and repair is important to the safe, reliable operation of all P&F Equipment. The service procedures recommended by P&F and described in this service manual are effective methods of performing service operations. Some of these service special tools should be used when and as recommended.
  • Page 3: Table Of Contents

    TABLE OF CONTENTS Specifications ................1-1 Important Safety Precautions .
  • Page 4: Specifications

    < LCD PANEL > Description Condition Unit Nominal Limit Horizontal pixels 1366 1. Native Pixel Resolution Vertical pixels [19PFL3504D/F7] 2. Brightness (w / filter) cd/m [22PFL3504D/F7] Horizontal ° -85 to 85 3. Viewing Angle Vertical ° -80 to 80 < VIDEO >...
  • Page 5: Important Safety Precautions

    IMPORTANT SAFETY PRECAUTIONS Prior to shipment from the factory, our products are strictly inspected for recognized product safety and electrical codes of the countries in which they are to be sold. However, in order to maintain such compliance, it is equally important to implement the following precautions when a set is being serviced.
  • Page 6 3. Design Alteration Warning - Do not alter or add 7. Product Safety Notice - Some electrical and to the mechanical or electrical design of this TV mechanical parts have special safety-related receiver. Design alterations and additions, characteristics which are often not evident from including, but not limited to circuit modifications visual inspection, nor can the protection they give and the addition of items such as auxiliary audio...
  • Page 7 Precautions during Servicing A. Parts identified by the # symbol are critical for safety. Replace only with part number specified. B. In addition to safety, other parts and assemblies are specified for conformance with regulations applying to spurious radiation. These must also be replaced only with specified replacements.
  • Page 8 Safety Check after Servicing Examine the area surrounding the repaired location for damage or deterioration. Observe that screws, parts and wires have been returned to original positions. Afterwards, perform the following tests and confirm the specified values in order to verify compliance with safety standards. 1.
  • Page 9: Standard Notes For Servicing

    STANDARD NOTES FOR SERVICING Circuit Board Indications How to Remove / Install Flat Pack-IC 1. The output pin of the 3 pin Regulator ICs is 1. Removal indicated as shown. With Hot-Air Flat Pack-IC Desoldering Machine: Top View Bottom View 1.
  • Page 10 3. The flat pack-IC on the CBA is affixed with glue, so With Soldering Iron: be careful not to break or damage the foil of each 1. Using desoldering braid, remove the solder from pin or the solder lands under the IC when all pins of the flat pack-IC.
  • Page 11 With Iron Wire: 2. Installation 1. Using desoldering braid, remove the solder from 1. Using desoldering braid, remove the solder from all pins of the flat pack-IC. When you use solder the foil of each pin of the flat pack-IC on the CBA flux which is applied to all pins of the flat pack-IC, so you can install a replacement flat pack-IC more you can remove it easily.
  • Page 12: Instructions For Handling Semi- Conductors

    Instructions for Handling Semi- conductors Electrostatic breakdown of the semi-conductors may occur due to a potential difference caused by electrostatic charge during unpacking or repair work. 1. Ground for Human Body Be sure to wear a grounding band (1 MΩ) that is properly grounded to remove any static electricity that may be charged on the body.
  • Page 13: Cabinet Disassembly Instructions

    CABINET DISASSEMBLY INSTRUCTIONS [19PFL3504D/F7] 1. Disassembly Flowchart Removal Step/ This flowchart indicates the disassembly steps for the Remove/*Unhook/ Loc. Part Fig. Unlock/Release/ cabinet parts, and the CBA in order to gain access to Note Unplug/Unclamp/ item(s) to be serviced. When reassembling, follow the Desolder steps in reverse order.
  • Page 14 [2] Rear Cabinet (S-2) (S-3) (S-2) (S-2) [1] Stand Assembly (S-1) Fig. D1 A91N2DC...
  • Page 15 [15] Front Cabinet (S-13) [4] Digital Main [11] Speaker CBA Unit [3] Jack [9] LCD Module Holder(D) Assembly (S-13) Speaker Cushion (S-6) (S-4) (S-12) Speaker [10] Speaker Cushion Holder(s) (S-5) Shield Box (H-1) (S-12) [11] Speaker [5] Jack [12] Function Holder(A) (S-7) (S-10)
  • Page 16 TV Cable Wiring Diagram To LCD Module Assembly To LCD Module Assembly Digital Main Main CBA CBA Unit CN201 CN3902 CN301 CN3701 CN1001 CN302 CN3702 CN1002 Jack CBA CN702 CN872 CN102 CN701 AC CORD CN871 To Speaker Junction CBA CN101 CL102A To Speaker IR Sensor CBA...
  • Page 17 CABINET DISASSEMBLY INSTRUCTIONS [22PFL3504D/F7] 1. Disassembly Flowchart Removal Step/ This flowchart indicates the disassembly steps for the Remove/*Unhook/ Loc. Part Fig. Unlock/Release/ cabinet parts, and the CBA in order to gain access to Note Unplug/Unclamp/ item(s) to be serviced. When reassembling, follow the Desolder steps in reverse order.
  • Page 18 [2] Rear Cabinet (S-2) (S-3) (S-2) (S-2) [1] Stand Assembly (S-1) Fig. D1 A9172DC...
  • Page 19 [15] Front Cabinet (S-13) [4] Digital Main [11] Speaker CBA Unit [3] Jack [9] LCD Module Holder(D) Assembly (S-13) Speaker Cushion (S-6) (S-4) (S-12) Speaker [10] Speaker Cushion Holder(s) (S-5) Shield Box (H-1) (S-12) [11] Speaker [5] Jack [12] Function Holder(A) (S-7) [14] Junction...
  • Page 20 TV Cable Wiring Diagram To LCD Module Assembly To LCD Module Assembly Digital Main CBA Unit Main CBA CN3902 CN201 CN1550 CN3701 CN301 CN302 CN3702 CN1650 CN1750 CN702 Jack CBA AC CORD CN872 CN102 CN701 CN871 To Speaker Junction CBA CN101 CL102A To Speaker...
  • Page 21: Electrical Adjustment Instructions

    ELECTRICAL ADJUSTMENT INSTRUCTIONS How to set up the service mode: General Note: “CBA” is abbreviation for “Circuit Board Assembly.” Service mode: Note: Electrical adjustments are required after 1. Use the service remote control unit. replacing circuit components and certain mechanical parts. It is important to perform 2.
  • Page 22 1. Purity Check Mode 2. VCOM Adjustment This mode cycles through full-screen displays of red, Test Point Adj. Point green, blue, and white to check for non-active pixels. [CHANNEL UP/DOWN ] 1. Enter the Service mode. Screen buttons 2. Each time pressing [7] button on the service M.
  • Page 23: White Balance Adjustment

    The white balance adjustment should be 5. [CUTOFF] Press [1] button to select “COR” for Red Cutoff performed when replacing the LCD Panel adjustment. Press [3] button to select “COB” for or Digital CBA. Blue Cutoff adjustment. [DRIVE] 3. White Balance Adjustment Press [4] button to select “DR”...
  • Page 24: How To Initialize The Lcd Tv

    HOW TO INITIALIZE THE LCD TV The purpose of initialization is to place the set in a new out of box condition. The customer will be prompted to select a language and program channels after the set has been initialized. To put the program back at the factory-default, initialize the LCD TV using the following procedure.
  • Page 25: Firmware Renewal Mode

    FIRMWARE RENEWAL MODE Equipment Required The appearance shown in *1 is described as follows. Appearance State a. USB memory Downloading the firmware from b. Remote Control Unit Downloading... the USB memory. Writing the downloaded firmware Writing... Firmware Update Procedure in flash memory. Checking...
  • Page 26: Troubleshooting

    TROUBLESHOOTING [ Power Supply Section ] FLOW CHART NO.1 The power cannot be turned on. Is the fuse (F601) normal? See FLOW CHART No.2 <The fuse blows out.> Check if there is any leak or short-circuiting on the primary circuit component, and service it if defective. (D601, D602, D603, D604, Q601, Q602, T601) Is the INV+31V line voltage normal? FLOW CHART NO.2...
  • Page 27 FLOW CHART NO.6 PANEL+24.5V is not output. FLOW CHART NO.7 PANEL+13V is not output. FLOW CHART NO.8 P-ON+7V is not output. FLOW CHART NO.9 P-ON+5V is not output. (PANEL+13V is outputted normally.) Replace Q635(Q636). A91N2TR...
  • Page 28: Flow Chart No

    FLOW CHART NO.10 TUNER+5V is not output. (PANEL+13V is outputted normally.) Replace Q637. FLOW CHART NO.11 P-ON+3V is not output. FLOW CHART NO.12 P-ON+3.3V(PANEL+3.3V) is not output. FLOW CHART NO.13 P-ON+9V is not output. (PANEL+13V is outputted normally.) Replace Q641. A91N2TR...
  • Page 29: Flow Chart No

    FLOW CHART NO.14 AL+3.3V is not output. (P-ON+7V is outputted normally) FLOW CHART NO.15 LCD-7.1V is not output. Replace Q206. FLOW CHART NO.16 SP+14V is not output. A91N2TR...
  • Page 30: Flow Chart No

    [ Video Signal Section ] FLOW CHART NO.1 The key operation is not functioning. Re-install the switches (SW101, SW103~SW107) correctly or replace the poor switch. Check the switches (SW101, SW103~SW107) and their periphery, and service it if defective. Replace Digital Main CBA Unit. FLOW CHART NO.2 No operation is possible from the remote control unit.
  • Page 31: Flow Chart No

    FLOW CHART NO.4 Picture does not appear normally.(Tuner input) FLOW CHART NO.5 Picture does not appear normally.(S-Video input) Pin(6): S-VIDEO-C Pin(8): S-VIDEO-Y FLOW CHART NO.6 Picture does not appear normally.(Y/Pb/Pr input) Pin(15): VIDEO-Y Pin(17): VIDEO-Pb Pin(19): VIDEO-Pr A91N2TR...
  • Page 32 [ Audio Signal Section ] FLOW CHART NO.1 Audio is not outputted normally.(Audio input) Check the line between Pin(2, 15) of IC771 and input terminal(JK753, JK754), and service it if defective. Check JK851, SP861,SP862 and their periphery circuit, and service it if defective. FLOW CHART NO.2 Audio is not outputted normally.(Component Audio input) Check the line between Pin(4, 11) of IC771 and input...
  • Page 33 FLOW CHART NO.3 Audio is not outputted normally.(Tuner input) Check TU302 and their periphery circuit, and service it if defective. Check JK851, SP861,SP862 and their periphery circuit, and service it if defective. FLOW CHART NO.4 Audio is not outputted normally.(HDMI Audio input) Check the line between Pin(5, 14) of IC771 and input terminal(JK721, JK722), and service it if defective.
  • Page 34 FLOW CHART NO.5 Audio is not outputted normally.(PC Audio input) Check the line between Pin(1, 12) of IC771 and input terminal(JK711), and service it if defective. Check JK851, SP861,SP862 and their periphery circuit, and service it if defective. A91N2TR...
  • Page 35: Block Diagrams

    BLOCK DIAGRAMS System Control Block Diagram A91N2BLS...
  • Page 36 Video Block Diagram A91N2BLV...
  • Page 37 Audio Block Diagram A91N2BLA...
  • Page 38 Digital Signal Process Block Diagram [19PFL3504D/F7(Serial No.:DS1A**********, DS2A**********)], [22PFL3504D/F7] A91N2BLD...
  • Page 39 Digital Signal Process Block Diagram [19PFL3504D/F7(Serial No.:DS3A**********)] A9ANABLD...
  • Page 40 Inverter Block Diagram [19PFL3504D/F7] A91N2BLINV...
  • Page 41 Inverter Block Diagram [22PFL3504D/F7] A9172BLINV...
  • Page 42 Power Supply Block Diagram [19PFL3504D/F7] A91N2BLP...
  • Page 43 Power Supply Block Diagram [22PFL3504D/F7] A9172BLP...
  • Page 44: Schematic Diagrams / Cba And Test Points

    SCHEMATIC DIAGRAMS / CBA AND TEST POINTS Standard Notes WARNING Many electrical and mechanical parts in this chassis have special characteristics. These characteristics often pass unnoticed and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc.
  • Page 45 LIST OF CAUTION, NOTES, AND SYMBOLS USED IN THE SCHEMATIC DIAGRAMS ON THE FOLLOWING PAGES: 1. CAUTION: CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE_A,_V FUSE. ATTENTION: UTILISER UN FUSIBLE DE RECHANGE DE MÊME TYPE DE_A,_V. 2.
  • Page 46 Main 1/4 Schematic Diagram [19PFL3504D/F7] 10-3 A91N2SCM1...
  • Page 47 Main 2/4 Schematic Diagram [19PFL3504D/F7] 10-4 A91N2SCM2...
  • Page 48 Main 3/4 Schematic Diagram [19PFL3504D/F7] 10-5 A91N2SCM3...
  • Page 49 Main 4/4 Schematic Diagram [19PFL3504D/F7] CAUTION ! NOTE: Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. The voltage for parts in hot circuit is measured using CAUTION ! : For continued protection against risk of fire, If Main Fuse (F601) is blown , check to see that all components in the power supply hot GND as a common terminal.
  • Page 50 Main 1/4 Schematic Diagram [22PFL3504D/F7] 10-7 A9172SCM1...
  • Page 51 Main 2/4 Schematic Diagram [22PFL3504D/F7] 10-8 A9172SCM2...
  • Page 52 Main 3/4 Schematic Diagram [22PFL3504D/F7] 10-9 A9172SCM3...
  • Page 53 Main 4/4 Schematic Diagram [22PFL3504D/F7] CAUTION ! NOTE: Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. The voltage for parts in hot circuit is measured using CAUTION ! : For continued protection against risk of fire, If Main Fuse (F601) is blown , check to see that all components in the power supply hot GND as a common terminal.
  • Page 54 Jack Schematic Diagram A91N2SCJ 10-11...
  • Page 55 Function Schematic Diagram 10-12 A91N2SCF...
  • Page 56 IR Sensor & Junction Schematic Diagram 10-13 A91N2SCIR...
  • Page 57 Digital Main 1/5 Schematic Diagram [19PFL3504D/F7(Serial No.:DS1A**********, DS2A**********)], [22PFL3504D/F7] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into five and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section.
  • Page 58 Digital Main 2/5 Schematic Diagram [19PFL3504D/F7(Serial No.:DS1A**********, DS2A**********)], [22PFL3504D/F7] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into five and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section.
  • Page 59 Digital Main 3/5 Schematic Diagram [19PFL3504D/F7(Serial No.:DS1A**********, DS2A**********)], [22PFL3504D/F7] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into five and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section.
  • Page 60 Digital Main 4/5 Schematic Diagram [19PFL3504D/F7(Serial No.:DS1A**********, DS2A**********)], [22PFL3504D/F7] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into five and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section.
  • Page 61 Digital Main 5/5 Schematic Diagram [19PFL3504D/F7(Serial No.:DS1A**********, DS2A**********)], [22PFL3504D/F7] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into five and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section.
  • Page 62 Digital Main 1/5 Schematic Diagram [19PFL3504D/F7(Serial No.:DS3A**********)] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into five and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section.
  • Page 63 Digital Main 2/5 Schematic Diagram [19PFL3504D/F7(Serial No.:DS3A**********)] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into five and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section.
  • Page 64 Digital Main 3/5 Schematic Diagram [19PFL3504D/F7(Serial No.:DS3A**********)] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into five and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section.
  • Page 65 Digital Main 4/5 Schematic Diagram [19PFL3504D/F7(Serial No.:DS3A**********)] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into five and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section.
  • Page 66 Digital Main 5/5 Schematic Diagram [19PFL3504D/F7(Serial No.:DS3A**********)] 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3301. IC3301 is divided into five and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section.
  • Page 67: Troubleshooting

    Main CBA Top View [19PFL3504D/F7] Because a hot chassis ground is present in the power supply circuit, an isolation transformer must be used. CAUTION ! Also, in order to have the ability to increase the input Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit.
  • Page 68 Main CBA Bottom View [19PFL3504D/F7] Because a hot chassis ground is present in the power CAUTION ! supply circuit, an isolation transformer must be used. Also, in order to have the ability to increase the input Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit.
  • Page 69 Main CBA Top View [22PFL3504D/F7] Because a hot chassis ground is present in the power supply circuit, an isolation transformer must be used. CAUTION ! Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. Also, in order to have the ability to increase the input CAUTION ! : For continued protection against risk of fire, slowly,when troubleshooting this type power supply...
  • Page 70 Main CBA Bottom View [22PFL3504D/F7] Because a hot chassis ground is present in the power CAUTION ! supply circuit, an isolation transformer must be used. Also, in order to have the ability to increase the input Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit. CAUTION ! : For continued protection against risk of fire, slowly,when troubleshooting this type power supply...
  • Page 71 Jack CBA Top View BA91N2F01021-A 10-28...
  • Page 72 Jack CBA Bottom View BA91N2F01021-A 10-29...
  • Page 73 IR Sensor CBA Top View Function CBA Top View IR Sensor CBA Bottom View Function CBA Bottom View BA91N2F01021-C Junction CBA Junction CBA Top View Bottom View BA91N2F01021-B BA91N2F01021 10-30...
  • Page 74: Waveforms

    WAVEFORMS WF1 ~ WF7 = Waveforms to be observed at Waveform check points. (Shown in Schematic Diagram.) Input: NTSC Color Bar Signal (with 1kHz Audio Signal) Pin 4 of CN302 Pin 17 of CN302 CVBS 0.2V 20µs VIDEO-Pb 0.2V 20µs Pin 8 of CN302 Pin 19 of CN302 20µs...
  • Page 75: Wiring Diagram

    WIRING DIAGRAM [19PFL3504D/F7] 12-1 A91N2WI...
  • Page 76 WIRING DIAGRAM [22PFL3504D/F7] 12-2 A9172WI...
  • Page 77: Exploded Views

    EXPLODED VIEWS Cabinet [19PFL3504D/F7 (Serial No. : DS1A**********)] Digital Main CBA Unit SP861 CL871 CL3701 CL3902 CL201 CL3702 CL872 SP862 Junction CBA Function CBA LCD1 CL701 IR Sensor CBA Jack CBA Main CBA Stand Assembly See Electrical Parts List for parts with this mark.
  • Page 78 Cabinet [19PFL3504D/F7 (Serial No. : DS2A**********, DS3A**********)] Digital Main CBA Unit Rear Assembly SP861 CL871 CL3701 CL3902 CL201 CL3702 CL872 SP862 Junction CBA Function CBA LCD1 CL701 IR Sensor CBA Jack CBA Main CBA Stand Assembly See Electrical Parts List for parts with this mark.
  • Page 79 Cabinet [22PFL3504D/F7 (Serial No. : DS1A**********)] Digital Main CBA Unit SP861 CL871 CL3701 CL3902 CL201 CL3702 CL872 SP862 Junction CBA Function CBA LCD1 CL701 IR Sensor CBA Jack CBA Main CBA Stand Assembly See Electrical Parts List for parts with this mark. AC601 13-3 A9172CEX...
  • Page 80 Cabinet [22PFL3504D/F7 (Serial No. : DS2A**********)] Digital Main CBA Unit Rear Assembly SP861 CL871 CL3701 CL3902 CL201 CL3702 CL872 SP862 Junction CBA Function CBA LCD1 CL701 IR Sensor CBA Jack CBA Main CBA Stand Assembly See Electrical Parts List for parts with this mark. AC601 13-4 A9175CEX...
  • Page 81 Packing 19PFL3504D/F7 (Serial No. : DS1A**********) /22PFL3504D/F7 (Serial No. : DS1A**********) X10 X11 Tape Stand Assembly Packing Tape Tape Packing Tape Packing Tape Some Ref. Numbers are not in sequence. Packing Tape 13-5 A91N2PEX...
  • Page 82: Mechanical Parts List

    MECHANICAL PARTS LIST [19PFL3504D/F7 (Serial No. : DS1A**********)] PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. OWNERS MANUAL A91N2UH 1EMN24559 Before replacing any of these components, read REMOTE CONTROL TRANSMITTER YKF259-...
  • Page 83 MECHANICAL PARTS LIST [19PFL3504D/F7 (Serial No. : DS2A**********)] PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. BATTERY R03-B500/01S XB0M451CZB01 Before replacing any of these components, read QUICK START GUIDE A91N2UH...
  • Page 84 MECHANICAL PARTS LIST [19PFL3504D/F7 (Serial No. : DS3A**********)] PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. QUICK START GUIDE A91N2UH 1EMN24560 Before replacing any of these components, read CHILD SAFETY SHEET A91H2UH...
  • Page 85 FCC ADDENDUM SHEET A8AF2UH 1EMN23679A NOTE: Parts that are not assigned part numbers CHILD SAFETY SHEET A91H2UH 1EMN24526 CONNECTION GUIDE A91N2UH 1EM325917 (---------) are not available. REGISTRATION CARD(PHILIPS) A91H2UH 1EMN24599 WALL MOUNT INSTRUCTION A91H2UH 1EMN24527 CABLE MANAGEMENT TIE A91H2UH 1EM428657 Ref. No. Description Part No.
  • Page 86 CHILD SAFETY SHEET A91H2UH 1EMN24526 carefully the product safety notice in this service CONNECTION GUIDE A91N2UH 1EM325917 manual. Don't degrade the safety of the product REGISTRATION CARD(PHILIPS) A91H2UH 1EMN24599 through improper servicing. WALL MOUNT INSTRUCTION A91H2UH 1EMN24527A CABLE MANAGEMENT TIE A91H2UH...
  • Page 87: Electrical Parts List

    ELECTRICAL PARTS LIST [19PFL3504D/F7 (Serial No. : DS1A**********)] PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. C605 POLYESTER FILM CAP . (PB FREE) 0.0012µF/ CA2A122DT018 100V J Before replacing any of these components, read C606 CERAMIC CAP .
  • Page 88 Ref. No. Description Part No. Ref. No. Description Part No. C1003 CHIP CERAMIC CAP .(1608) B K 0.01µF/50V CHD1JK30B103 D401 DIODE FR104-B NDLZ000FR104 C1004 CHIP CERAMIC CAP .(1608) B K 0.01µF/50V CHD1JK30B103 D402 DIODE ZENER 10BSB-T26 NDTB010BST26 C1005 POLYESTER FILM CAP . (PB FREE) 0.022µF/ CA2A223DT018 D404 SWITCHING DIODE 1SS133(T-77)
  • Page 89 Ref. No. Description Part No. Ref. No. Description Part No. D1011 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q641 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P D1012 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q643 TRANSISTOR 2SA950-Y(TE2 F T) QQSY02SA950F D1013 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q801 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P D1014 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q1001...
  • Page 90 Ref. No. Description Part No. Ref. No. Description Part No. RES CARBON FILM T 1/4W J 150 Ω CHIP RES. 1/10W J 22k Ω R239 RCX4151T1001 R668 RRXAJR5Z0223 RES CARBON FILM T 1/4W J 3.9k Ω CHIP RES. 1/10W J 10k Ω R240 RCX4392T1001 R669...
  • Page 91 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES. 1/10W J 390 Ω RES CARBON FILM T 1/4W J 10 Ω R1019 RRXAJR5Z0391 R1103 RCX4100T1001 CHIP RES. 1/10W J 1k Ω CHIP RES. 1/10W J 12k Ω R1020 RRXAJR5Z0102 R1104...
  • Page 92 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES. 1/10W J 75 Ω C724 CHIP CERAMIC CAP . F Z 1µF/10V CHD1AZ30F105 R752 RRXAJR5Z0750 CHIP RES. 1/10W J 75 Ω C731 CHIP CERAMIC CAP . CH J 39pF/50V CHD1JJ3CH390 R753 RRXAJR5Z0750...
  • Page 93 FUNCTION CBA (MJC-B) Ref. No. Description Part No. FUNCTION CBA (MJC-B) ---------- Consists of the following: CAPACITORS C108 CAP CERAMIC (AX) 0.1µF/50V/F/Z CA1J104TU062 C109 CAP CERAMIC (AX) 0.1µF/50V/F/Z CA1J104TU062 RESISTORS RES CARBON FILM T 1/4W J 220 Ω R108 RCX4221T1001 RES CARBON FILM T 1/4W G 10k Ω...
  • Page 94 ELECTRICAL PARTS LIST [19PFL3504D/F7 (Serial No. : DS2A**********)] PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. C605 POLYESTER FILM CAP . (PB FREE) 0.0012µF/ CA2A122DT018 100V J Before replacing any of these components, read C606 CERAMIC CAP .
  • Page 95 Ref. No. Description Part No. Ref. No. Description Part No. C1003 CHIP CERAMIC CAP .(1608) B K 0.01µF/50V CHD1JK30B103 D401 DIODE FR104-B NDLZ000FR104 C1004 CHIP CERAMIC CAP .(1608) B K 0.01µF/50V CHD1JK30B103 D402 DIODE ZENER 10BSB-T26 NDTB010BST26 C1005 POLYESTER FILM CAP . (PB FREE) 0.022µF/ CA2A223DT018 D404 SWITCHING DIODE 1SS133(T-77)
  • Page 96 Ref. No. Description Part No. Ref. No. Description Part No. D1009 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q641 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P D1010 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q643 TRANSISTOR 2SA950-Y(TE2 F T) QQSY02SA950F D1011 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q801 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P D1012 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q1001...
  • Page 97 Ref. No. Description Part No. Ref. No. Description Part No. RES CARBON FILM T 1/4W J 3.9k Ω CHIP RES. 1/10W J 10k Ω R240 RCX4392T1001 R669 RRXAJR5Z0103 CHIP RES.(1608) 1/10W 0 Ω RES CARBON FILM T 1/4W J 270 Ω R302 RRXAZR5Z0000 R670...
  • Page 98 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES. 1/10W J 390 Ω CHIP RES. 1/10W J 10k Ω R1019 RRXAJR5Z0391 R1107 RRXAJR5Z0103 CHIP RES. 1/10W J 1k Ω R1020 RRXAJR5Z0102 R1108 WIRE CP STP-S-0.50 XZ40F0REN001 CHIP RES. 1/10W J 33k Ω CHIP RES.
  • Page 99 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES.(1608) 1/10W 0 Ω RES CARBON FILM T 1/4W J 10 Ω C734 RRXAZR5Z0000 R756 RCX4100T1001 CHIP RES.(1608) 1/10W 0 Ω RES CARBON FILM T 1/4W J 10 Ω C735 RRXAZR5Z0000 R757...
  • Page 100 Ref. No. Description Part No. RES CARBON FILM T 1/4W J 220 Ω R108 RCX4221T1001 RES CARBON FILM T 1/4W G 10k Ω R109 RCX4103T1002 RES CARBON FILM T 1/4W G 4.7k Ω R111 RCX4472T1002 RES CARBON FILM T 1/4W G 2.7k Ω R112 RCX4272T1002 RES CARBON FILM T 1/4W G 4.7k Ω...
  • Page 101 ELECTRICAL PARTS LIST [19PFL3504D/F7 (Serial No. : DS3A**********)] PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. C605 POLYESTER FILM CAP . (PB FREE) 0.0012µF/ CA2A122DT018 100V J Before replacing any of these components, read C606 CERAMIC CAP .
  • Page 102 Ref. No. Description Part No. Ref. No. Description Part No. C1003 CHIP CERAMIC CAP .(1608) B K 0.01µF/50V CHD1JK30B103 D401 DIODE FR104-B NDLZ000FR104 C1004 CHIP CERAMIC CAP .(1608) B K 0.01µF/50V CHD1JK30B103 D402 DIODE ZENER 10BSB-T26 NDTB010BST26 C1005 POLYESTER FILM CAP . (PB FREE) 0.022µF/ CA2A223DT018 D404 SWITCHING DIODE 1SS133(T-77)
  • Page 103 Ref. No. Description Part No. Ref. No. Description Part No. D1009 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q641 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P D1010 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q643 TRANSISTOR 2SA950-Y(TE2 F T) QQSY02SA950F D1011 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q801 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P D1012 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 Q1001...
  • Page 104 Ref. No. Description Part No. Ref. No. Description Part No. RES CARBON FILM T 1/4W J 3.9k Ω CHIP RES. 1/10W J 10k Ω R240 RCX4392T1001 R669 RRXAJR5Z0103 CHIP RES.(1608) 1/10W 0 Ω RES CARBON FILM T 1/4W J 270 Ω R302 RRXAZR5Z0000 R670...
  • Page 105 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES. 1/10W J 390 Ω CHIP RES. 1/10W J 10k Ω R1019 RRXAJR5Z0391 R1107 RRXAJR5Z0103 CHIP RES. 1/10W J 1k Ω R1020 RRXAJR5Z0102 R1108 WIRE CP STP-S-0.50 XZ40F0REN001 CHIP RES. 1/10W J 33k Ω CHIP RES.
  • Page 106 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES.(1608) 1/10W 0 Ω RES CARBON FILM T 1/4W J 10 Ω C734 RRXAZR5Z0000 R756 RCX4100T1001 CHIP RES.(1608) 1/10W 0 Ω RES CARBON FILM T 1/4W J 10 Ω C735 RRXAZR5Z0000 R757...
  • Page 107 Ref. No. Description Part No. RES CARBON FILM T 1/4W J 220 Ω R108 RCX4221T1001 RES CARBON FILM T 1/4W G 10k Ω R109 RCX4103T1002 RES CARBON FILM T 1/4W G 4.7k Ω R111 RCX4472T1002 RES CARBON FILM T 1/4W G 2.7k Ω R112 RCX4272T1002 RES CARBON FILM T 1/4W G 4.7k Ω...
  • Page 108 ELECTRICAL PARTS LIST [22PFL3504D/F7 (Serial No. : DS1A**********)] PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. C631 ELECTROLYTIC CAP . 470µF/25V M CE1EMASDL471 Before replacing any of these components, read C632 ELECTROLYTIC CAP .
  • Page 109 Ref. No. Description Part No. Ref. No. Description Part No. C1401 CHIP CERAMIC CAP .(1608) B K 0.1µF/50V CHD1JK30B104 D212 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1403 ELECTROLYTIC CAP . 10µF/50V M H7 CE1JMAVSL100 D304 DIODE ZENER 33BSC-T26 NDTC033BST26 C1404 ELECTROLYTIC CAP . 10µF/50V M H7 CE1JMAVSL100 D401 DIODE FR104-B...
  • Page 110 Ref. No. Description Part No. Ref. No. Description Part No. D1007 DIODE ZENER 10BSB-T26 NDTB010BST26 D1765 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1009 DIODE ZENER 12BSB-T26 NDTB012BST26 D1767 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1010 WIRE CP STP-S-0.50 XZ40F0REN001 D1012 WIRE CP STP-S-0.50 XZ40F0REN001 IC201 IC TL3472CDR NSZBA0TTY115...
  • Page 111 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES. 1/10W J 22k Ω Q1500 FET MOS SMD TPC8214-H QF2ZTPC8214H R411 RRXAJR5Z0223 CHIP RES. 1/10W J 22k Ω Q1550 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P R412 RRXAJR5Z0223 CHIP RES. 1/10W J 22k Ω Q1551 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P...
  • Page 112 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES. 1/10W F 2.7k Ω R682 WIRE CP STP-S-0.50 XZ40F0REN001 R1044 RRXAFR5H2701 METAL OXIDE FILM RES. 1W J 3.3 Ω CHIP RES. 1/10W F 1.2k Ω R683 RN013R3ZU001 R1045 RRXAFR5H1201 METAL OXIDE FILM RES.
  • Page 113 JACK ASSEMBLY Ref. No. Description Part No. CHIP RES. 1/10W J 390 Ω R1650 RRXAJR5Z0391 Ref. No. Description Part No. CHIP RES. 1/10W J 390 Ω R1651 RRXAJR5Z0391 JACK ASSEMBLY 1ESA20116 CHIP RES. 1/10W J 27k Ω R1652 RRXAJR5Z0273 Consists of the following: CHIP RES.
  • Page 114 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES. 1/10W J 56k Ω R717 RRXAJR5Z0563 JK731 JACK RCA PCB S GREEN 01/RCA-101H(GN) JXRJ010YUQ03 CHIP RES. 1/10W J 56k Ω R718 RRXAJR5Z0563 JK732 JACK RCA PCB S BLUE 01/RCA-101H(BL) JXRJ010YUQ04 CHIP RES.
  • Page 115 JUNCTION CBA (MJC-D) Ref. No. Description Part No. JUNCTION CBA (MJC-D) ---------- Consists of the following: CONNECTOR CN101 242 SERIES CONNECTOR TUC-P08X-B1 WHT JCTUB08TG002 20090624 15-29 A9172EL...
  • Page 116 ELECTRICAL PARTS LIST [22PFL3504D/F7 (Serial No. : DS2A**********)] PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. C631 ELECTROLYTIC CAP . 470µF/25V M CE1EMASDL471 Before replacing any of these components, read C632 ELECTROLYTIC CAP .
  • Page 117 Ref. No. Description Part No. Ref. No. Description Part No. C1021 CHIP CERAMIC CAP .(1608) B K 0.1µF/50V CHD1JK30B104 D211 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1401 CHIP CERAMIC CAP .(1608) B K 0.1µF/50V CHD1JK30B104 D212 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 C1403 ELECTROLYTIC CAP . 10µF/50V M H7 CE1JMAVSL100 D304 DIODE ZENER 33BSC-T26...
  • Page 118 Ref. No. Description Part No. Ref. No. Description Part No. D1005 DIODE ZENER 15BSB-T26 NDTB015BST26 D1764 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1007 DIODE ZENER 10BSB-T26 NDTB010BST26 D1765 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1009 DIODE ZENER 12BSB-T26 NDTB012BST26 D1767 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133 D1010 WIRE CP STP-S-0.50 XZ40F0REN001...
  • Page 119 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES. 1/10W J 2.2k Ω Q1402 NPN TRANSISTOR SMD 2SC4081UBTLQ QQ1Q2SC4081U R409 RRXAJR5Z0222 CHIP RES. 1/10W J 22k Ω Q1500 FET MOS SMD TPC8214-H QF2ZTPC8214H R411 RRXAJR5Z0223 CHIP RES. 1/10W J 22k Ω Q1550 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P...
  • Page 120 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES. 1/10W F 820 Ω CHIP RES. 1/10W J 12k Ω R681 RRXAFR5H8200 R1043 RRXAJR5Z0123 CHIP RES. 1/10W F 2.7k Ω R682 WIRE CP STP-S-0.50 XZ40F0REN001 R1044 RRXAFR5H2701 METAL OXIDE FILM RES. 1W J 3.3 Ω CHIP RES.
  • Page 121 JACK ASSEMBLY Ref. No. Description Part No. RES CARBON FILM T 1/4W J 33k Ω R1609 RCX4333T1001 Ref. No. Description Part No. CHIP RES. 1/10W J 390 Ω R1650 RRXAJR5Z0391 JACK ASSEMBLY 1ESA20116 CHIP RES. 1/10W J 390 Ω R1651 RRXAJR5Z0391 Consists of the following: CHIP RES.
  • Page 122 Ref. No. Description Part No. Ref. No. Description Part No. CHIP RES. 1/10W J 56k Ω R717 RRXAJR5Z0563 JK731 JACK RCA PCB S GREEN 01/RCA-101H(GN) JXRJ010YUQ03 CHIP RES. 1/10W J 56k Ω R718 RRXAJR5Z0563 JK732 JACK RCA PCB S BLUE 01/RCA-101H(BL) JXRJ010YUQ04 CHIP RES.
  • Page 123 JUNCTION CBA (MJC-D) Ref. No. Description Part No. JUNCTION CBA (MJC-D) ---------- Consists of the following: CONNECTOR CN101 242 SERIES CONNECTOR TUC-P08X-B1 WHT JCTUB08TG002 20090805 15-37 A9175EL...
  • Page 124: Revision History

    REVISION HISTORY Chassis FL9.0 • 2009-06-25 Individual parts numbers added for the JACK ASSEMBLY • 2009-08-03 19PFL3504D/F7 (Serial No. : DS2A**********) added • 2009-08-10 22PFL3504D/F7 (Serial No. : DS2A**********) added • 2009-10-01 19PFL3504D/F7 (Serial No. : DS3A**********) added 16-1 FL9.0PREV...

This manual is also suitable for:

22pfl3504d/f7