This menu offers you options for setting the date and time, recording format and microphone sensitivity,
(de)activation of the device sounds and voice-activated recording, switching the illumination on/off,
changing the contrast and reformatting the memory.
Access to the DPM menu:
• The DPM menu can only be accessed while the DPM is in stop mode.
• Press the Jog Dial for about two seconds. You can switch between the DPM menu items by turning
the Jog Dial:
. A checkmark (
Changing the settings:
• To select a menu item, for instance, to set the date and time, move the Jog Dial up or down to the
• Press the Jog Dial to confirm the selection. This opens the menu item and allows you to make
changes to it. Confirm the changes by pressing the Jog Dial; this returns you to the DPM main
To leave the DPM menu, press the DEL button, wait 5 seconds or select the menu item
DPM menu and confirm this by pressing the Jog Dial.
Low Power Mode
If the DPM remains inactive for longer than four minutes, it automatically switches to low power mode
and the device displays the date and time. - To reactivate the DPM, press any button.
If the DPM is inactive for longer than 2 hours, the device automatically switches off. To reactivate the
DPM, use the „on/off" switch on the back of the device.
Switching the DPM On/Off
Switching the DPM on: Unlock the „on/off" switch on the back of the device. The current file, the
time recorded in the file, the total remaining recording time and, for example, the current time are
shown on the LC display.
Switching the DPM off: Move the „on/off" switch on the back of the device to the „off" position to
switch off the DPM.
Detailed operating instructions can be found on the supplied CD-ROM under „User Manuals".
) next to a menu item means that the corresponding setting
to close the