Varytec VN 1000 dmx, Gezir 1000 dmx User Manual page 4

VN 1000 dmx: Your model includes a mounting bracket designed for overhead installation; it
may be installed at floor level or suspended overhead. If the unit is to be mounted using the
bracket, it is important that the fog does not shoot directly at any one's face. Whatever
installation method you choose, do not allow the unit to have more than a 25 degree angle of
inclination.
VN 1000 dmx Description
Note: A fluid level sensor is installed on the unit. The machine will stop to fog if the fluid is lower than usable
level.
If you experience low output, pump noise or no output at all, unplug immediately. Check fluid level, the
external fuse, remote control connection and power from the wall. If all of the above appears to be O.K.,
plug the unit again. If fog does not come out after holding the remote button down for 30 seconds, check
the hose attached to the tank to make sure there is fluid going through the hose. If you are unable to
determine the cause of the problem, do not simply continue pushing the remote button, as this may
damage the unit. Return the machine to your VARYTEC dealer.