Oki C710n User Manual page 31

ITEM
EPSON FX Character
Setup Pitch
Character
Set
Symbol Set
Letter O
Style
Zero
Character
Line Pitch
White Page
Skip
CR Function
Line Length
Form Length
TOF Position
Left Margin
Fit to Letter
Text Height
Color Setup Ink
Simulation
UCR
CMY 100%
Density
CMYK
Conversion
SETTINGS EXPLANATION
10 CPI/12 CPI/ Specifies character pitch in Epson FX emulation.
17 CPI
20 CPI/
Proportional
SET-2 Sets a character set.
SET-1
IBM 437 Sets the Symbol Set for Epson FX Emulation.
(see machine operator panel for complete list).
Enable/Disable Specifies the style that replaces ø (9B) and ¥ (9D) with ø
(ou) and Ø (zero).
Normal/Slashed Specifies the style of 0(zero). SLASHED: SLASH ZERO
6/8 LPI Sets line space.
On/Off Sets whether to eject a blank sheet. Available only when
simplex is set.
CR/CR+LF Sets action when CR code is received.
80/136 Column Specifies the number of characters per line.
11/11.7/12 inch Specifies the length of paper.
0.0/0.1/~1.0 Sets the position from the top edge of paper.
inch
0.0/0.1/~1.0 Sets the amount to shift the horizontal print start position
inch to the right.
Enable/Disable Sets the printing mode that can fit print data, equivalent
to 11 inches (66 lines), in the LETTER-size printable area.
Same/Diff Sets height of a character.
SAME: Regardless of CPI, same height
DIFF: According to CPI, character heights vary.
Off The machine has its own process simulation engine which
simulates standard colors in the printer.
SWOP
This function is available only with PS language jobs.
Euroscale
Japan
Low Selects limitation to the toner layer thickness.
Medium If paper curl occurs in dark printing, selecting MEDIUM or
LIGHT sometimes helps reduce this curl.
High
UCR = Under Color Removal.
Enable/Disable Enable/Disable 100% output against the CMY100% TRC
compensation. Ordinarily, the TRC compensation function
holds control for the appropriate print density; thus 100%
output is not always possible.
Selecting ENABLE will enable 100% output in any
individual color. The actual print, including the TRC
compensation function is limited to an appropriate area.
This function is for special purposes such as specification
in CMYK color reduction in PS.
On/Off Setting to "OFF" will simplify the conversion process of
CMYK data, which will reduce the processing time.
This setting is ignored when Ink Simulation function is
used.
PS only
Menu functions > 31