Oki C710n User Manual page 27

ITEM
Print Setup Mono-Print
(cont.) Speed
Default
Orientation
Form Length
Edit Size
Trapping
Trapping X
Width
Trapping Y
Width
X Dimension
Y Dimension
SETTINGS EXPLANATION
Auto Sets the monochrome print speed. Prints at the most
appropriate speed for page process if Auto is set.
Color Speed
Prints always at the color print speed if Color is set.
Normal Speed
Prints always at the monochrome print speed if Normal is
High Quality
set.
Prints always at 26ppm of the gradation print speed for
both color and monochrome print if High Quality is set.
Portrait Specifies print orientation.
Landscape Not valid for PS (valid only for PCL/ IBMPPR/EPSONFX/
HP-GL2).
5 lines Sets the number of lines that can be printed on a page
~ Not valid for PS (valid only for PCL/HP-GL2).
60 lines Default values listed to the left are for Letter/A4. In
practice, however, they change according to the size of
~
paper loaded in the tray.
128 lines
Cassette Size/ Sets the size of an area to draw when the host PC does
Letter/ not specify the size via the paper edit size designating
Executive/ command (Not valid for PS - only for PCL).
Legal14/
Legal13.5/
Legal13/A4/A5/
A6/B5/Custom/
C5/Com-10
Envelope/
Monarch
Envelope/DL
Envelope/C5/
Com-9 Envelope
Off Trapping, or spreading and choking, is a prepress
technique consisting of creating small overlaps between
Narrow
abutting colors in order to mask registration issues in the
Wide
graphical production.
0 pixels Sets the horizontal dimension of the trapping area.
~
4 pixels
0 pixels Sets the vertical dimension of the trapping area.
~
4 pixels
64 mm
Specifies paper width of Custom paper as a default value.
~ Sets a paper size at right angles to the paper run
direction.
210 mm
~
216 mm
127 mm Specifies paper length of Custom paper as a default value.
~ Sets a paper size in the same direction as the paper run
direction.
297 mm
~
1220 mm
Menu functions > 27