Skip Feed Printing - Lanier JP1030 Operator's Manual

Skip Feed Printing

If the backs of prints are dirty, you
can increase the time between prints
using the { { { { Skip Feed} } } } key. When one
sheet of paper is fed, the drum rotates
twice. This gives you the chance to re-
move prints one by one from the pa-
per delivery tray or insert one sheet of
paper between two prints.
Note
❒ You can select how many times the
drum rotates with the user tools.
See "22. Skip Feed Number" on
p.57 "User Tools Menu".
A A A A
Press the { { { { Skip Feed} } } } key.
Note
❒ You can temporarily change the
default value. While holding
down the { { { { Skip Feed} } } } key, press
the number of the drum rota-
tions from 2 to 9 with the num-
ber keys.
B B B B
Place your originals on the expo-
sure glass or in the optional docu-
ment feeder.
C C C C
Enter the number of prints with
the number keys.
D D D D
Press the { { { { Start} } } } key.
Printing starts automatically after
trial print is delivered.
Note
❒ If you want to check the print
image, press the { { { { Auto Cycle} } } }
key to turn off Auto Cycle mode
before pressing the { { { { Start} } } } key.
For details, see p.14 "When
Auto Cycle is off".
Skip Feed Printing
1
41