Printing On Thick Or Thin Paper; Pressure Lever Position - Lanier JP1030 Operator's Manual

Operation

Printing on Thick or Thin Paper

When you make prints on thick (127.9
to 209.3g/m
1
dard (52.3 to 127.9g/m
lb) or thin (47.1 to 52.3g/m
13.9 lb) paper, perform the following
steps.

Pressure Lever Position

A A A A
Shift the feed roller pressure le-
ver to the Thick, Standard, or
Thin paper position.
Note
❒ Shift the lever according to the
paper weights as shown in the
following table.
Thick
Standard
*1
Thin
*1
When paper is smaller than B5,
1
5 /
2
81.4g/m
feed roller pressure lever to the
Thin paper position.
30
2
, 34.0 to 55.6 lb), stan-
2
, 13.9 to 34.0
2
, 12.5 to
Metric Inch
Version Version
127.9 — 34.0 —
2
209.3g/m 55.6 lb
52.3 — 13.9 —
2
127.9g/m 34.0 lb
47.1 — 12.5 —
2
52.3g/m 13.9 lb
" × 8
1
/ " and heavier than
2
2
(21.6 lb), move the
B B B B
Make sure that paper feed side
plates touch the paper lightly.
C C C C
When you finish prints, shift the
feed roller pressure lever to the
Standard paper position.
ZCTH150E