Adjusting The Print Image Density; Before Making A Master; After Making A Master - Lanier JP1030 Operator's Manual

Operation

Adjusting the Print Image Density

You can adjust the print image densi-
ty to suit your needs. There are two
1
ways:
❖ ❖ ❖ ❖ Before Making a Master
Use the { { { { Image Density} } } } key.
❖ ❖ ❖ ❖ After Making a Master
Use the { { { { W W W W } } } } or { { { { V V V V } } } } key.

Before Making a Master

A A A A
Use the { { { { Image Density} } } } key before
pressing the { { { { Start} } } } key.
Note
❒ When you use originals with
colored background such as
blue or red, adjust the image
density to lighter to prevent
printing with dirty background.
20

After Making a Master

A A A A
Press the { { { { V V V V } } } } key to increase the
speed and press the { { { { W W W W } } } } key to re-
duce the speed.
Note
❒ The faster the printing speed be-
comes, the lighter the printing
density is. If you want darker
prints, decrease the printing
speed.
Reference
Fo r de t ai ls ab out p r in t in g
speed, see p.23 "Changing the
Printing Speed".