Table of Contents
Advertisement
Standard Printing
The operations are different depend-
ing on whether you use Auto Cycle
mode or not. With this mode, the ma-
chine can process masters and make
prints at one stroke. The default set-
ting of this mode is on. You can
change the default setting. See "15.
Auto Cycle Mode" on ⇒ p.57 "User
Tools Menu".
Reference
When you use the optional docu-
ment feeder, see p.46 "Placing
Originals in the Document Feed-
er".
A A A A
Lift the exposure glass cover.
B B B B
Place the original face down on
the exposure glass. The original
should be aligned to the rear left
corner.
C C C C
Lower the exposure glass cover.
When Auto Cycle is on
A Make sure that Auto Cycle
mode is selected.
B Enter the number of prints
with the number keys.
ZDCH110E
Standard Printing
1
13
Advertisement
Table of Contents
