Heater Stand And Location - Urban BFX770 Operating Instructions Manual

STEP-BY-STEP PROCEDURE
STEP 7 :
7-1 Access the gas storage area by raising the gas cylinder
housing and placing it on top of the post bracket.
7-2 Follow the regulator instructions for connecting to gas.
7-3 Place propane (recommended fuel) gas cylinder
onto cylinder base.
7-4 Replace the gas cylinder housing.
8
SETTING UP

HEATER STAND AND LOCATION

• The heater is for outdoor use only. Always ensure adequate fresh
air ventilation.
• Always maintain proper clearance to combustible materials, i.e.
top 50cm (18 inches) and sides 60cm (24 inches) minimum –see
figure 1.
• Heater must be placed on firm level ground.
• The heater must conform to local codes and storage/handling of
LPG.
• Never operate heater in an explosive atmosphere where petrol or
other flammable liquids or vapours are stored.
• Before moving heater turn off gas supply, allow burner to cool
and use wheels provided.
Figure 1 9