Dismantling - TGA Mystere Operating Instructions And Owner's Handbook

5.1. Tiller adjustment
Press down the tiller lever and pull tiller up to preferred position. Release lever and ensure tiller has locked
(Fig 6).
5.2. Remove Seat
To remove the seat,release the seat locking lever by pressing and holding down and at the same time pull and
lift the seat up (Fig 3.1).
5.3. Rear Cover Removal
The cover is held in place by Velcro at the front, sides and rear. Holding the cover at the wheel arches, pull
straight up. Disconnect the rear light cable connectors before fully removing the cover (Fig 6).
5.4. Battery Connection
The batteries are already fitted to the Frontier and held by a Velcro strap. For safety reasons in transit they may
have been disconnected. Push the corresponding connectors firmly together. They differ in size and shape so
cannot be connected incorrectly (Fig. 7).
5.5. Fitting the Rear Cover
The rear lights have to be connected before fully fitting the cover. The connectors are marked 'L' and 'R'. Take
care to fit the correct way and not trap cables when fitting cover. Locate hole in cover over seat mechanism and
tabs on front of cover into slots on footplate and push down to engage Velcro (Fig 6).
5.6. Attaching the Seat
Place the seat assembly over the seat pillar and push down, holding the seat
release lever up. Release the lever and partly swivel the seat to check that
the seat lock has engaged. Operate the seat lock again by pushing down
and swivel the seat through 90
that the seat locks into the new position. Repeat so that the seat faces
forward in the normal driving position.
The seat height can be adjusted by removing the nut and bolt holding
the top section of the seat pillar and moving the top section to the
required height and refitting the nut and bolt.

6. Dismantling

For ease of loading and transportation, it may be easier in some cases to dismantle the Mystere.
1. Remove seat
2. Remove Rear Cover
3. Remove Batteries. Unplug connectors, undo Velcro straps and lift out batteries. Take care when
lifting batteries as they are heavy.
4. Refit rear cover.
5. Fold down tiller.
This is as far as the Mystere will dismantle.
Fig 6
0
, release the seat locking handle and check
8
Fig 7
Fig 8