Seat Adjustment - TGA Mystere Operating Instructions And Owner's Handbook

Table of Contents

Advertisement

Clock - This may be seen in the bottom right hand corner of the display panel (2.3). To change the time hold in
the centre button (2.A) for four seconds and the clock will change to hours, minutes and seconds, with the hours
flashing. This can be changed using buttons 2.B and 2.C. Press button 2.A again and minutes will come up
flashing. Set this as required and carry out the same process for seconds.
Date - Press button 2.A again and the date will appear in place of the time. Please note this will appear the
reverse of what we normally know. In other words the year first, followed by month, ending in day. Repeat
above sequence to change date.
Temperature - This appears in the bottom left hand corner (2.5) and this can be changed from ºC to ºF by
pressing either button 2.B or 2.C.
Battery Condition Indicator - This is the last function on the visual display and is shown by five blocks on the
left hand side (2.4). Also shown by the battery drawing at (2.4) displaying five lines. When all of the blocks and
lines are displayed the battery is fully charged. Each block and line represents 20% of the battery charge used
up. When you are left with just one block displayed it is wise to recharge straight away. The light at 1.8 comes
on when battery charge is low.

3. Seat Adjustment

1. The seat can be swivelled fully through 360° .
variety of different positions if you need to sit at a table etc.
Swivelling it within 90° allows easy entry and exit. The lever is
located on the right hand side of the seat. When the lever is
released make sure the seat locks into place (Fig 3.1).
2. The seat adjustment lever located at the front of seat allows the
seat to be adjusted forwards or backwards (Fig 3.2).
3. The Backrest Adjustment Lever located at the LH side of the seat
allows the backrest to be adjusted for comfort (Fig 4.1).
4. Both armrests can be adjusted for angle by use of the lever
shown at Fig 4.2. The headrest can be made higher simply by
pulling gently upwards. To lower there is a small lever located on
the top of the seat at the base of the left hand headrest support.
Simply move the lever and adjust to preferred height (fig 4.3).
5. The Seat Height is adjustable, see "Assembly" for details.
6. The Tiller Lever allows the Tiller to be moved to a comfortable position for driving. Press the lever, set
the tiller to your preferred position and release lever. Make sure the tiller locks into position (Fig 5).
3
2
Fig 4
This allows a
1
6
Fig 3
Fig 5
1
2
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents