Track Search; Chapter / Title Search; Time Search; Marker Setup - Symphonic UDV680 Owner's Manual

Dvd/cd player & video cassette recorder
Table of Contents

Advertisement

H9930BD(EN).fm Page 20 Wednesday, July 20, 2005 4:58 PM
2) Press
ENTER
to change a value to "1" (Natural effect), "2"
(Emphasized effect) or "OFF" (original sound).
3) Press
MODE
RETURN
or
to exit.
Note: •
Virtual Surround will not be effective if the sound
mode is set to something other than "STEREO" (for
Audio CDs and Video CDs only). (Refer to page 13.)
Turn down the level or turn it "OFF" if the sound is
distorted.
The setting will be saved even if this unit is turned off.
This function cannot be used during x1.3 and x0.8
Rapid Play with Voice. (Refer to page 18.)

Track Search

CD
MP3
There are three ways to begin the playback of a specific track
on a disc.
Using the Number buttons
1) Press
the Number buttons
number.
•Playback will start at the selected track.
•For any discs, to play a single-digit track, press the
number directly (e.g. for track 3, press
•For the disc with less than 100 tracks, to play a double-
+10
digit track, press
, then the number (e.g. for track 26,
+10
2
6
press
,
,
).
•For the disc with more than 100 tracks, to play a double-
+10
0
digit track, press
,
, then the number of the track.
+10
(e.g. for track 26, press
+10
digit track, press
, then the number of the track (e.g.
+10
for track 126, press
,
Using SEARCH MODE
1) Press
SEARCH MODE
.
•The Track Search display appears.
2) Within 30 seconds, select a desired track number using
the Number buttons
.
•Playback will start at the selected track.
•For the disc with more than 10 but less than 100 tracks,
to play a single-digit track, press
of the track (e.g. for track 3, press
•For the disc with more than 100 tracks, to play a single
or a double-digit track, press
the track (e.g. for track 3, press
press
0
,
2
,
6
).
•In any other cases, just press the number of the track.
Using SKIP H G
During playback, press
SKIP
G
Press it repeatedly to skip subsequent tracks.
SKIP
Press
to go back to the beginning of the current
H
track. Press it repeatedly to go back to the previous tracks.
•Track number will appear briefly on the front panel
display.
•If
SKIP
are pressed while the playback is paused,
H G
the playback will be paused again after skipping to the
next track.
•During Dual Playback, using
affect MP3 tracks.
Note: • SKIP
are not available when playback is
H G
stopped.
JPEG
VCD
to enter the desired track
3
).
0
2
6
,
,
,
). To play a triple-
1
2
6
,
,
).
0
first, then the number
0
3
,
).
0
first, then the number of
0
,
0
,
3
and for track 26,
to move to the next track.
SKIP
will only
H G
20

Chapter / Title Search

Using SEARCH MODE
1) During playback, press
SEARCH MODE
Chapter Search, twice for the Title Search.
/29
2) Enter the desired chapter/title number using
buttons
.
Using the Number buttons
1) During playback, press
the Number buttons
desired chapter number.
•Playback will start at the selected chapter.
•For single digit chapters (1-9), press a single number
(e.g. to play chapter 3, press
+10
•To play chapter 26, press
Note: •
Depending on the disc being played, using
the Number buttons
cannot be performed.
Using SKIP H G
SKIP
During playback, press
G
Press it repeatedly to skip subsequent chapters.
Press
SKIP
to go back to the beginning of the current
H
chapter. Press it repeatedly to go back to the previous chapter.

Time Search

DVD-V
1) During playback, press
SEARCH MODE
the Time Search screen appears on the TV screen.
TOTAL
2) Within 30 seconds, enter a desired disc time using
the Number buttons
.
•Playback will start at the specified time.
•For DVDs, enter a desired time of the current title.
•For Audio CDs and Video CDs, enter a desired time of
the current track.
•Press
CLEAR
to erase the incorrect input.
Note: •
"0" appears automatically when there is no need to
enter a number. For example, "0:0_:_ _" appears in
the Time Search display if the total time of the disc or
track is less than 10 minutes.
Time Search is not available on some discs.

Marker Setup

DVD-V
Use markers to memorise your favourite places on a disc.
1) During playback, press
SEARCH MODE
the Marker Setup screen appears on the TV screen.
2) Press
or
to select 1, 2, 3, 4, 5, 6, 7, 8, 9 or 10 and
s
B
ensure that "_ _ _ _:_ _:_ _" appears in the display.
3) When the disc reaches the desired point, press
•The Title or Track and elapsed time will appear on the
TV screen.
4) To return to the marker later, press
repeatedly until the Marker Setup screen appears and
to choose the desired marker, then press
B
DVD-V
once for the
the Number
to enter the
3
).
2
6
,
,
.
to go to the next chapter.
CD
VCD
repeatedly until
1:29:00
CD
VCD
repeatedly until
ENTER
.
SEARCH MODE
or
s
ENTER
.
EN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents