Real Time Tape Counter; Automatic Operations; Dvd Operation; Basic Playback - Symphonic UDV680 Owner's Manual

H9930BD(EN).fm Page 16 Wednesday, July 20, 2005 4:58 PM

Real Time Tape Counter

• This counter shows the elapsed recording or playback time
in hours, minutes, and seconds on screen. (Nothing is
shown in the case of blank portion.)
• The front panel display shows elapsed time in hours and
minutes.
• The " – " indication will appear when the tape is rewound
further than the tape counter position "0:00:00".

DVD Operation

Basic Playback

DVD-V CD MP3
Getting started
• Turn on the power of the TV, amplifier and any other
components which are connected to this unit.
• Make sure the TV and audio receiver (commercially
available) are set to the correct channel.
• Make sure that the DVD OUTPUT indicator is lit. If not,
press DVD to switch to DVD mode.
1) Press STANDBY-ON .
2) Press OPEN/CLOSE to open disc loading tray.
3) Place the chosen disc on the tray, with the label facing up.
4) Press PLAY .
B
•The tray will close automatically, and playback will then
start from the first chapter or track of the disc.
•When you play back a DVD with a title menu
recorded, it may appear on the screen. In this case, refer
to "Title Menu".
5) Press STOP
to stop playback.
C
Note: •
A "prohibited icon" may appear at the
top-right on the TV screen during
operation, warning that a prohibited
operation has been encountered by this
unit or the disc.
•
Some DVDs may be played from title 2 or 3 due to
specific programmes.
•
During the playback of two layered disc, pictures may
stop for a moment. This happens while the 1st layer is
being switched to the 2nd layer. This is not a
malfunction.
•
DVDs recorded with the NTSC system can be viewed
on PAL, NTSC or Multi system TV. (Refer to page
23.)
•
Depending on the TV, when playing back a NTSC
DVD on a PAL TV, the picture may roll up or down,
shrink vertically and black bars may appear at the both
top and bottom of the screen.
• It may take a time to deliver the picture or the sound.
This is not a malfunction.

Automatic Operations

Automatic Rewind, Eject
When the end of a tape is reached during recording, playback
or fast-forward, the tape will be automatically rewound to the
beginning. After that, the unit will eject the tape.
• The unit will not rewind the tape automatically during
timer recording or One Touch Recording.
Tape Eject
A tape can be ejected with the unit power on or off (but the
unit must be plugged in).
• If a timer recording is set, press
a tape.
•
JPEG VCD

General Features

DVDs or Video CDs may contain menus to navigate the disc
and access special features. Enter the appropriate
buttons
selection in the DVD main menu and press
confirm.
Note: •

Disc Menus

1) Press
•The DVD main menu will appear.
2) If the feature is not available,
the TV screen.
3) If disc menu is available on the disc, audio languages,
subtitle options, chapters for the title and other options
will appear for selection.
4) Press
ENTER

Title Menu

1) Press
•The title menu will appear.
2) If the feature is not available,
the TV screen.
3) Press
ENTER
•Playback will begin at the selected title.
1) Insert a Video CD.
•The title menu will appear.
2) Press
•Playback will begin at the selected title.

Calling up a Menu Screen During Playback

• Press
• Press
16
STOP/EJECT
You can change the on-screen language in "PLAYER
MENU" setting. (Refer to page 23.)
Cursor
or press K / L / / to highlight your
s B
Unless stated, all operations described are based on
remote control use. Some operations can be carried
out with the buttons on the front panel.
MENU .
symbol may appear on
Cursor K / L / / to select an item, and press
s B
to confirm selection.
TOP MENU
.
symbol may appear on
Cursor K / L / / to select an item, and press
s B
to confirm selection.
the Number buttons
to select an item.
MENU
to call up the DVD main menu.
TOP MENU
to call up the title menu.
twice to eject
Number
ENTER to
DVD-V
DVD-V
VCD
DVD-V
EN