Picture Select; Auto Return; Quick-Find; Index Search - Symphonic UDV680 Owner's Manual

H9930BD(EN).fm Page 12 Wednesday, July 20, 2005 4:58 PM
1) Press VCR , then MENU .
2) Press or to select "SET UP", then press
K L
3) Press or to select "AUTO REPEAT".
K L
4) Press
so that "ON" appears next to "AUTO REPEAT"
B
on the TV screen.
•When in Stop mode, Auto Repeat mode will start
automatically.
•If the on-screen menu still remains, press
then press PLAY .
B
Note: •
Once you select the Auto Repeat mode, it stays in
effect even after you turn off the unit.
To Stop Playback
STOP
Press .
C
To Exit the Auto Repeat Mode
Repeat steps 1) to 3) . Then, press
"OFF" will appear next to "AUTO REPEAT" on the TV
MENU
screen. Press to exit.
MENU
TIMER
SET UP
INITIAL

Picture Select

This function enables you to select the picture quality of a
tape.
• Use the remote control for this procedure.
1) Press VCR MENU
, then .
2) Press
or to select "SET UP", then press
K L
3) Press or to select "PICTURE".
K L
4) Press until the desired mode (NORMAL, SOFT or
B
SHARP) is indicated on the TV screen.
5) Press MENU
to exit.
Note: •
Once you select the Picture Select mode, it stays in
effect even after you turn off the unit.
MENU
TIMER
SET UP
INITIAL

Auto Return

.
B
When timer recording is finished, the unit will automatically
rewind the tape to the beginning where it started recording.
If there are any remaining programmes including Daily,
Everyday or Weekly, AUTO RETURN will not operate.
1) Press
MENU to exit,
2) Press
3) Press
4) Press
Watch the Recorded Timer Programme
Press
.
B
PLAY

Quick-Find

This function enables you to search and confirm the contents
MENU
of the recorded programme(s) using the index mark.
TIMER
• Use the remote control for this procedure.
SET UP
INITIAL
• The tape must be fully rewound.
1) Press
To Skip to the Beginning of Next Programme
1) Press
To View at Normal Speed
1) Press
SET UP
AUTO RETURN [ ON ]
AUTO REPEAT [ ON ]
Note: •
[ NORMAL ]
PICTURE

Index Search

This function enables you to search the beginning of the
.
B desired programme recorded an index mark.
• The index mark will be made automatically when
• The index mark is not recorded if
• The time gap between index marks on the tape should be
MENU
TIMER
• Use the remote control for this procedure.
SET UP
INITIAL
1) Press
2) Press
3) Press
SET UP
[ ON ]
AUTO RETURN
[ ON ]
AUTO REPEAT Note: •
PICTURE [ NORMAL ]
12
VCR , then MENU .
or repeatedly to point to "SET UP", then press
K L
.
B
or to point to "AUTO RETURN", then press
K L
.
B
"ON" will appear next to "AUTO RETURN".
MENU .
T-SET to turn on the unit and press
.
B
VCR , then QUICK-FIND .
QUICK-FIND .
PLAY
.
B
•The Quick-Find is cancelled.
This function will not operate in the Recording mode.
• When you want to cancel the Quick-Find while in
STOP
progress, press .
C
•
When the end of a tape is reached during the Quick-
Find, the tape will be automatically rewound to the
beginning. After rewinding finishes, the unit will eject
the tape.
REC/OTR
is pressed. It will also be marked at the starting
point of Timer recording and OTR.
released during recording.
greater than 1 minute for SP recording and 2 minutes for
LP recording.
VCR , then SEARCH MODE
or repeatedly until the number of programmes
K L
that you want to skip appears.
or to start Index Search.
s B
•The unit begins rewinding or fast forwarding to the
beginning of desired programme. When the preset
programme is reached, the unit will start playback
automatically.
Index Search can be set up to 20.
•
This function will not operate in the Recording mode.
•
Operations must be followed up within 30 seconds,
from steps 2) to 3) . Otherwise the Index Search mode
will be cancelled.
•
To exit the Index Search mode, press
STOP
Or press after step
C
VCR , then press
PAUSE is pressed and
k
.
MENU 2)
in step .
3)
.
EN