Hints For Otr And Timer Recording - Symphonic UDV680 Owner's Manual

H9930BD(EN).fm Page 14 Wednesday, July 20, 2005 4:58 PM
1) Press VCR , then MENU .
2) Press
or to select "TIMER", then press
K L
Note: •
If you have not set the clock yet, "CLOCK" setting
menu appears. If so, follow the steps outlined in the
"Setting the Clock". (Refer to page 9.) Then, set the
timer.
• When you press after pressing
B
7) , the input mode will move to the next item.
• If you do not press within 5 seconds of setting an item,
B
the input mode will move to the next item.
• Press to go back to the previous item from the current
s
4) 8)
setting during steps to
TIMER NUMBER is flashing, the entire programme
contents will be erased.
3) Programme number flashes. Press
the desired programme number appears. Then, press
4) Select once, daily, everyday or weekly recording.
For once-only recording
: Press
the relevant month appears, and then press
repeatedly until your desired day appears.
For daily recording : To record a TV programme at the
same time on the same channel from Monday through
Friday. While the month digit is flashing, press
repeatedly to select "MO-FR".
For everyday recording : To record a TV programme at
the same time on the same channel everyday. While the
month digit is flashing, press
"MO-SU".
For weekly recording
: To record a TV programme at the
same time on the same channel every week. While the
month digit is flashing, press
"W-MO" (example: every monday).
5) Press or repeatedly until the relevant start hour
K L
appears. Next, enter the minute digit.
6) Press or repeatedly until the relevant end hour
K L
appears. Next, enter the minute digit.
7) Press
or repeatedly until the relevant channel number
K L
appears.
8) Press
or repeatedly until the desired tape speed
K L
appears.
9) Press . Programme 1 is now completed.
B
•To set another timer programme, repeat steps
10)Press MENU to exit.
11)Press T-SET to activate a timer recording.
•If the unit switches to the DVD mode after pressing
T-SET
, the indicator will not appear. The
indicator will appear when the unit is turned off by
pressing STANDBY-ON .
•If the unit is turned off after pressing
indicator will appear.
MENU
TIMER
SET UP
INITIAL
To Stop a Timer Programme Which Has Already
Started
STOP/EJECT
Press on the unit.
Note: • STOP
on the remote control will not function in the
C
Timer Recording mode.
To Correct Timer Programmes
If the unit is already in timer standby mode, press
STOP/EJECT on the front panel or
control to exit from the standby mode.
1) Repeat steps 1) 3)
to in the "Timer Recording".
2) Select the programme number you want to change using
or .
s B
.
B
or during steps 3) to
K L
. If is pressed when the
s
or repeatedly until
K L
.
B
or repeatedly until
K L
or
K L
or
K L
or repeatedly to select
K L
or repeatedly to select
K L
3) 9)
to .
T-SET
, the
TIMER NUMBER 1
--/--
DATE
--:--
START
--:--
END
--
CHANNEL
--
SPEED
T-SET on the remote
14
3) Enter the correct numbers using
4) Press MENU
to exit.
5) Press T-SET
to return to timer standby mode.
To Cancel or Check the Start/End Time
If the unit is already in timer standby mode, press
STOP/EJECT on the front panel or
control to exit from the standby mode.
1) 2)
1) Repeat steps to in the "Timer Recording".
2) Select the programme number you want to check using
or . The details of selected programme appears on the
L
TV screen. You may cancel the entire programme by
pressing .
s
3) Press MENU
to exit.
Avoid Overlap of TIMER Programmes...
A timer programme does not work while another programme
is under execution.
Programme 1
Programme 2
Programme 3
9:00

Hints for OTR and Timer Recording

• Press VCR on the remote control before you set Timer
Recording. Make sure the remote control is in the VCR
T-SET
mode, then press .
• If a tape is not in the unit or does not have the erase-
prevention tab, the indicator flashes and Timer
Recording cannot be performed. Please insert a recordable
tape.
• When Timer Recordings are set, the
appear. To use the VCR as usual until the time for the
recording, press T-SET so that the
Select either VCR or DVD mode, then continue with the
other features as described in this manual.
After an OTR and a Timer Recording has been set,
this unit operates as follows:
• If a tape runs out before an OTR or a Timer Recording is
finished, the unit ejects the tape and switches to the DVD
mode automatically. If the DVD power is off, the unit does
not switch to the DVD mode but goes into the timer
standby mode. Press T-SET on the remote control or
STOP/EJECT
on the unit, then press
VCR function again.
• Once the unit turns to the timer standby mode, no VCR
functions are available until T-SET
the front panel and VCR on the remote control will not
function.)
• To cancel the timer standby mode, press
STOP/EJECT
remote control or
VCR to activate the VCR function again.
• The mode of the unit and the remote control may differ
(VCR mode or DVD mode) when you set Timer
Recording or after you cancelled Timer Recording.
VCR DVD
• Press or on the remote control to select your
desired mode before you operate.
When an OTR or a Timer Recording is completed...
• If Auto Power Off for DVD has been activated and there
are Timer Recordings on standby, the unit turns off
automatically, and the indicator on the front panel
display lights up to indicate the unit is in the timer standby
mode.
or , then press .
K L B
T-SET on the remote
K
10:00 11:00
indicator will
indicator disappears.
VCR
to activate the
is pressed. ( OUTPUT on
T-SET
on the
on the unit, then press
EN