Picture Control - Philips 14PV135 Service Manual

Tv-vcr combination
Hide thumbs Also See for 14PV135:
Table of Contents

Advertisement

3. C-Trap Adjustment
Purpose: To get minimum leakage of the color signal
carrier.
Symptom of Misadjustment: If C-Trap Adjustment is
incorrect, stripes will appear on the screen.
Test point
Adj. Point
J349F3
P+/P-
(B-OUT)
buttons
Tape
M. EQ.
Oscilloscope,
---
Pattern Generator
minimum
Note: J349F3 (B-Out)--- Main CBA
1. Connect Oscilloscope to J349F3.
2. Input a color bar signal from RF (or Ext.) input.
Enter the Service mode. (See page 1-6-10.)
3. Press [0] button on the remote control unit and
select C-TRAP Mode.
4. Press [P+/P-] buttons on the remote control unit so
that the carrier leakage B-Out (4.43MHz) value
becomes minimum on the oscilloscope.
5. Turn the power off and on again.
4. How to measure the standard
V-ENV
value

Picture Control

Purpose: To set the recording condition appropriate
for the recording tape.
Symptom of Misadjustment: Recording or playing
back picture quality may fall. The picture will be tinted.
1. Insert a new tape (type: E180) for the DSPC align-
ment into the TV/VCR.
2. Input the black raster signal from the video input
jack (VIDEO-IN).
3. Enter the Service Mode. (See page 1-6-10.)
Mode
Input
RF
Color Bar
(or Ext.)
Spec.
200mVp-p Max.
Figure
Fig. 1
of
Digital
Studio
4. To enter the DSPC mode, press [1] button on the
remote control unit. Recording starts automatically
and "DSPC" appears on the display.
DSPC
VIDEO INPUT JACK (Ext. input)
5. Recording continues for 10 seconds in SP mode.
Note: Since the reference value of LP V-ENV is
computed from the reference value of SP V-ENV,
there is no need to survey it.
6. The tape is rewinded to the recording start point.
7. The unit enters the play mode automatically and
the V-ENV levels of each the reference value of SP
mode and the computing value of LP mode are
memorized into the EEPROM.
8. "OK" or "NG" appears on upper left corner of the
screen with blueback.
In case of "OK": "OK" (green) is indicated without
ejecting tape.
In case of "NG": "NG" (red) is indicated with eject-
ing tape.
l
TVCR
OK
Normal
1-6-12
TVCR
Fig. 2
TVCR
NG
Abnormal
Fig. 3
T6450EA

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents