Fujitsu AB*14LBAJ Service Instruction page 17

5-3 Wall Mounted (AS) type
1. VERTICAL LOUVER CONTROL
(Function Range)
Each time the button is pressed, the air direction range will change as follow:
(Operation Range)
Cooling / Dry mode
Heating mode
The remote control unit's display does not change.
Use the air direction adjustments within the ranges shown above.
The vertical airflow direction is set automatically as shown,
in accordance with the type of operation selected.
Cooling / Dry mode
Heating mode
During AUTO mode operation, for the first minute after beginning operation,
airflow will be horizontal
1-2. SWING OPERATION
When the swing signal is received from the remote controller,
the vertical louver starts to swing.
(Swinging Range)
Cooling mode / Dry mode / Fan mode (
Heating mode / Fan mode (
When the indoor fan is either at S-lo or Stop mode, the swinging operation is interrupted
and the louver stops at the memorized position.
Horizontal flow
Downward flow
; the air direction cannot be adjusted during this period.
)
01-14
(Air Direction Range)
)