Lubrication Points; Roller Chains; Feed Cup Drive Sprocket Square Bore; Front Roller Bearings - Land Pride All Purpose Seeder APS1548 Operator's Manual

Section 5: Maintenance & Lubrication

Lubrication Points

Lubrication
Legend
12227
30848
24977
10/13/11
Table of Contents
Multi-purpose
spray lube
APS1548, APS1560, APS1572 & APS1586 All Purpose Seeder 313-354M
Multi-purpose Multi-purpose
grease lube oil lube

Roller Chains

Type of Lubrication: Chain Lubricant
Quantity: Coat Generously

Feed Cup Drive Sprocket Square Bore

Type of Lubrication: Oil
Quantity: Squirt a generous amount of oil on to the square
feed cup shaft and move seed rate adjustment lever back
and forth in order to get oil back into the square bore.
IMPORTANT: DO NOT use petroleum lubricant on
the plastic seed cups. Petroleum will absorb into the
plastic and swell the plastic components. Use talc
on plastic seed cups for lubrication.

Front Roller Bearings

4 Zerks (1 At each front roller end)
Type of Lubrication: Multi-purpose Grease
Quantity: 4 - 5 pumps
Intervals in hours
50
at which lubrication
is required
As
Required
25
Hours
25
Hours
31