Command Set; Command List For Local Device - HandyWave HandyPort-Serial HPS-120 User Manual

4.3. Command Set

4.3.1. Command List for Local Device

Item Syntax
1. Connecting AAddr<Enter>
address
2. Baud rate BBaud Rate
3. COM port CCOM Port
4. PIN code EPIN<Enter>
5. Flow control FFlow Control
6. Connection Mmode
mode
7. Friendly name Nname<Enter> Set a friendly name up to 11
8. Command for O
the remote
9. Parity Bit Pparity
10. Stop Bit Sstop
11. View V
12. Exit X
13. Usage ?
Waning!
If you push the RST button, the COM port of HPS-120 will be stored the factory setting.
Description
Set a remote
address for
connection.
Change the baud rate
This is only valid in connection
mode 2.
Authentication Off: Type <Enter>
Authentication On: Type up to 11
characters
Set the Flow control.
Set a connection mode
characters.
Enter configuration mode
for the remote.
Set the parity bit.
Set the stop bit.
Display
information
Apply changes.
Print the usage.
UK / Europe Office
Tel: +44 (0)8700 434040
Fax: +44 (0)8700 434045
info@omniinstruments.co.uk
www.omniinstruments.co.uk
Remarks
device A local
a wireless BD_ADDR always need to
be difference.
Baud Rate - 0: 1200, 1:
2400, 2: 4800, 3: 9600, 4:
19200, 5: 38400, 6: 57600,
7: 115200
Paired
have a same PIN code.
0: None, 1: Hardware, 2:
DTR/DSR, 3: Hardware &
DTR/DSR
0: 1:1 Mode, 1: WAIT Mode,
2: REGISTER
CONNECT Mode
0: None, 1: Odd 2: Even
0: 1 Stop, 1: 2 Stop
configuration
Australia / Asia Pacific Office
Tel +61 (0)282 442 363
Fax +61 (0)294 751 278
info@omniinstruments.com.au
www.omniinstruments.com.au
and remote
adapters should
and
9
USA / Canada Office
Tel +1-866-849-3441
Fax +1-866-628-8055
info@omniinstruments.net
www.omniinstruments.net