Advertisement
AS SE MB LY ST EP
CONSOLE CABLE
COVER
10
415T_Rev.1.5.indd 10-11
* NOTE: There is no hardware bag
for Assembly Step 3.
A
Connect the CONSOLE CABLES and
carefully tuck wires in CONSOLE
MAST to avoid damage.
Note: Do not pinch console cable.
Be sure the console cable prongs
are aligned and the ends are tightly
seated into each other.
B
Attach CONSOLE CABLE COVER.
C
Slide the WATER BOTTLE HOLDER
down into the hole in the CONSOLE
and snap together.
* NOTE: Be careful not to pinch any
WATER BOTTLE HOLDER
wires while assembling the masts.
CONSOLE
CONSOLE MAST
ASSEMBLY STEP 4
HARDWARE BAG CONTENTS :
SCREW (F)
15 mm
Qty: 4
ROLLER END CAPS
SCREWS (F)
ASSEM BLY COMPLETE!
A
Open HARDWARE BAG .
B
Fold up treadmill (see page 13 for
folding instructions).
NOTE: Lock latch must be securely
engaged before proceeding with
assembly.
C
Attach the right ROLLER END CAP
using 2 SCREWS (F).
D
Repeat on the other side.
11
5/13/08 4:07:24 PM
Hide quick links:
Advertisement
