Backlight Brightness Setting - Mitsubishi Electric PAC-YT52CRA Instruction Manual

ON
1 Press the button to stop the air conditioning unit.
OFF
2 Press the
the Mode skip settings display. (The current setting will appear.)
ON
3 Press the button to select ON or OFF.
OFF
ON: AUTO mode can be selected by pressing the
OFF: AUTO mode cannot be selected by pressing the
4 Press the
the setting.

Backlight brightness setting

(2)
The air conditioning
unit stops.
ON
(1)
OFF
Auto off without
pressing any buttons.
ON
1 Press the button to stop the air conditioning unit.
OFF
2 Press the and
backlight brightness. (The factory setting is "bright.")
* Repeat step 2 above to switch the settings A, B, and C.
* The setting will automatically turn off if step 2 is not performed for a certain period of time.
and buttons simultaneously for three seconds or longer to bring up
and buttons simultaneously for three seconds or longer to complete
(Press the buttons for three seconds or longer.)
+
A. Bright
buttons simultaneously for three seconds or longer to change the
button during operation.
button during operation.
B. Dark
(2)
+
– 11 –
OFF
C. Light off
(Press the buttons for three
seconds or longer.)