RAB Lighting GNLED13Y Instruction Manual page 2

Straight Downlight Shade
CAT# GSST
1. The Shade mounts to the Housing
with four Shade Mounting Screws
provided with the Shade.
2. Shade has keyhole slots for easy
installation.
GSST Shade
Shade Mounting
screws(4)
Angled Cone Shade
CAT# GSAC
1. The Shade mounts to the Housing
with four Shade Mounting Screws
provided with the Shade.
2. Shade has keyhole slots for easy
installation.
GSAC Shade
Shade Mounting
Screws (4)
1-888-RAB-1000
2
Angled Dome Shade
CAT# GSAD
1.
Housing
2.
Lens Refl ector Kit
CAT# LRFGNLED Clear Lens with Spot Refl ector and Rectangular Refl ector for
optional patterns.
1.
Housing
2.
3.
4.
5.
6.
Rectangular Light Pattern
Orient refl ector properly within fi xture
or rotate fi xture to set beam in
orientation desired.
www.rabweb.com
The Shade mounts to the Housing
with four Shade Mounting Screws
provided with the Shade.
Shade has keyhole slots for easy
installation.
GSAD Shade
Shade Mounting
screws(4)
Remove frosted lens & frame.
Install Spot or Rectangular
Refl ector.
When installing the Rectangular
Refl ector be aware of the direction
Rectangular Light Pattern.
See illustration below.
We recommend using a clear lens for
these refl ector types. Replace frosted
lens and frame with clear lens & frame
provided with this kit.
Rectangular Refl ector
Tighten four Housing Screws.
Add shade if desired.
1-888-RAB-1000
Housing
Housing Screws (4)
Spot Refl ector
www.rabweb.com
3