Connecting The Speaker Cords - Pioneer A-107 Operation Instructions Manual

CONNECTING THE SPEAKER CORDS

1. Strip off the vinyl covering and twist the tip of the
wire core.
10mm
Twist the wire core
2. Loosen the knob and insert the wire core into the
terminal hole.
3. Tighten the knob to fix the wire core in place.
2
\
1
NOTE:
Do not allow any of the cord conductors to protrude from the
terminals or touch any other conductors. Malfunctioning or
breakdowns may occur when conductors come into contact
with each other.
Speaker Impedance
The speaker systems used should have a rated impedance in
the range of 6 - 16 Ω.
CONNECTING THE INPUT/OUTPUT
CORDS
Connect the white plug to the L (left) channel, and the red plug
to the R (right) channel. Be sure to push the plugs securely.
White plug
3
(Except for U.K., European, Australian and
NewZealand models)
AC OUTLETS (SWITCHED TOTAL 100 W MAX)
Power supplied through these outlets is turned on and off
by the amplifier's POWER switch. Total electrical power
consumption of connected equipment should not exceed
100 W.
AC OUTLETS (UNSWITCHED 100 W MAX)
Power flows continually to this outlet, regardless of whether
the amplifier is switched to ON. Electrical power consump-
tion of the connected equipment should not exceed 100
W.
NOTES:
÷ The equipment should be disconnected by removing
the power plug from the wall socket when not in regular
use, e.g., when on vacation.
÷ Do not connect appliances with high power consump-
tion such as heaters, irons, or television sets to the AC
OUTLETS in order to avoid overheating or fire risk.
CAUTION:
DO NOT CONNECT A MONITOR OR TV SET TO
THIS UNIT'S AC OUTLETS.
CONNECTIONS
Left channel
L
Right channel
R
Red plug
AC
OUTLETS
SWITCHED
TOTAL
100 W MAX
UNSWITCHED
100 W MAX
5
<ARB7137>