Cleaning The Platen Roller/Roll Paper End Sensor - Epson TM-L90 User Manual

Cleaning the Platen Roller/Roll Paper End Sensor

When paper dust accumulates on the platen roller or the roll paper end sensor, follow the
steps below to clean them. To maintain good functional capabilities, clean them regularly
(every 6 months).
1. Turn off the printer, open the peeler cover, and then the roll paper cover.
2. Clean the platen roller and roll paper end sensor with a cotton swab lightly moistened
with water or an alcohol.
Platen roller
.
3. Close the roll paper cover after the water or alcohol has dried.
Roll paper end sensor
TM-L90 User's Manual 17
English