Table of Contents
Advertisement
Section 6: Features & Benefits
Section 6: Features & Benefits
Features
Cutter bar 81", 96" and 112" widths
Common oil chamber
Maximum cutting angle
(Angle cutter bar is to tractor axle)
Narrow transport
Hydraulic cutterbar lift
Cutterbar drive
1 1/4" Minimum cutting height
Power drive belt
2 hardened blades per disc,
3" Blade overlap
High blade tip speed
Storage stand
26
DM3705, DM3706, and DM3707 Series Disc Mowers 327-083M
Table of Contents
DM37 Series Disc Mowers
5, 6 and 7 Disc models available to meet a wide range of customer needs.
Gears splash oil from gear to gear.
Warranty
2 Years Parts & Labor on cutter bar and gearbox. One year Parts & Labor on hydraulic
cylinder, hydraulic hoses, and seals are considered wear items.
Cutting blades and belts are considered wear items.
35 Degrees down, and 35 degrees up for cutting along embankments.
74" - usually not much wider than tire distance, safer in transport.
Hook-ups
Three types of hook-ups. Cat. 2, Cat. 2 Quick-Hitch, and Cat. 3.
Rock guards
Replaceable.
Quickly raise for obstructions.
Gear drive for high efficiency and long life.
Run skid shoes on ground to mow very short.
Stronger than multiple belt system.
Reversible blades give double life, hardened for longevity against debris.
reversible
Eliminates skipping for a cleaner cut.
15,764 fpm, offers a nice clean cut.
Aids in storage and hooking to tractor.
Skid shoes
Easily replaceable when worn out.
Benefits
9/15/06
Advertisement
Table of Contents
