Advertisement
Knob setting in terms of speed
The tool speed can be
set
for anywhere from 1,500 t o 2,800 rpm. Simply align any knob
numbered setting with the arrow indicator. Consult chart below for approximate speeds
obtained for each of the numbered settings.
You can also obtain speeds other than the settings by adjusting the knob in between.
For example, for 2,150 rpm, align so that arrow will be pointed halfway between the
numbers 3 and 4.
Numbered Setting
CAUTION
:
The knob for speed settings can be turned
only as far as 6 and back t o 1. Do not force
the knob past
6
or the speed change func-
tion may no longer work.
RPM
2
I
1750
2800
CAUTION
:
MOVING A SANDING DISC OR WOOL BONNET.
ALWAYS SWITCH OFF AND UNPLUG THE TOOL BEFORE INSTALLING OR RE-
CAUTIONS :
1. Always wear safety
glasses and mask during operation.
2.
Grip the tool firmly with both hands.
3. Do not touch the rotating abrasive disc.
4. When sanding metal surfaces, be careful of the flying sparks. Handle tool in terms of
the direction they fly.
6
Advertisement
