Changing The Priority Of Overlapped Settings - Sony RDR-GX310 Operating Instructions Manual

Changing the priority of
overlapped settings
If the timer settings overlap, the program that was
set last has priority and will be recorded. A timer
recording of lower priority may be canceled, start
from the middle or stop midway through the
program.
You can change the priority of a program if
necessary.
When the timer settings overlap
The program set last has priority.
Example: You set the timer in order of A, B, and
C (setting C has first priority)
7:00
A
9:00
Actual recording
A
7:00 9:00
If you give setting B priority over setting C, all of
program B will be recorded and program C is
recorded only after program B has ended.
A
7:00 9:00
If the end time of one recording and the start
time of another are the same
The end of program A will be cut.
7:00
A
will be cut off
11:00
B
10:30
C
B C
10:30
B C
11:00
9:00 10:00
B
1
Press TIMER LIST (timer list).
The Timer List appears.
TIMER LIST
Mon-Sat 10:00PM -10:15PM
Fri 10/29 8:30PM - 9:30PM
Fri 10/29 9:00PM -10:00PM
Sat 10/30 4:00PM - 5:00PM
2
Select an overlapped timer setting, and
press ENTER (enter).
indicates that the timer setting is
overlapped by another timer setting.
3
Select "Check Overlap," and press ENTER
(enter).
Check Overlap
These timer settings overlap.
Fri 10/29 8:30PM - 9:30PM
Fri 10/29 9:00PM -10:00PM
Change
4
Select "Change," and press ENTER
(enter).
Change priority
Fri 10/29 9:00AM - 10:15AM
Where do you want to move this timer setting?
Mon-Sat 10:00AM - 10:30AM
5
Press M/m to change the timer setting's
priority, and press ENTER (enter).
The setting moves to its new location in the
list. A timer setting higher up in the list has
higher priority.
To return to the Timer List, select "Cancel."
z Hint
You can change the priority of a timer setting while
recording.
10:30PM
4ch SP
25ch SP
3ch SLP
125ch SLP
25ch SP
3ch SLP
Close
Cancel
3ch SLP
25ch SP
51