Safety Labels - Land Pride at 2560 Operator's Manual

Important Safety Information

Safety Labels

Your Grooming Mower comes equipped with all safety
labels in place. They were designed to help you safely
operate your implement. Read and follow their
directions.
1. Keep all safety labels clean and legible.
2. Replace all damaged or missing labels. To order new
labels go to your nearest Land Pride dealer or visit our
dealer locator at landpride.com.
3. Some new equipment installed during repair requires
4 FD2560, FD2572, AT2560 & AT2572 Grooming Mower, 3-spindle 310-148M
Table of Contents
safety labels to be affixed to the replaced component as
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request.
4. Refer to this section for proper label placement.
To install new labels:
a. Clean the area the label is to be placed.
b. Spray soapy water on the surface where the label is to
be placed.
c. Peel backing from label. Press firmly onto the surface.
d. Squeeze out air bubbles with the edge of a credit card.
13098
13100
13098
Land Pride
818-555C
Rotating Blade Hazard
(Flat Deck)
818-555C
Rotating Blade Hazard
(Air Tunnel)
818-556C
Thrown Object Hazard
(Flat Deck)
10/11/06