M102 DYNA COMP COMPRESSOR ® DESCRIPTION POWER DIRECTIONS SPECIFICATIONS • Rotate OUTPUT knob clockwise Input Impedance 1 MΩ • In-line compressor “evens The Dyna Comp is powered by one • Run a cable from your guitar out” your signal to the Dyna Comp’s INPUT jack to increase overall volume of Output Impedance 10 kΩ 9-volt battery (remove bottom plate to install), a 9-volt AC adapter such and run another cable from the effect or counterclockwise to • Especially useful for increased Nominal Input Level -5 dBV as the Dunlop ECB003/ECB003E, Dyna Comp’s OUTPUT jack to decrease it. sustain with stable dynamics Nominal Output Level -12 dBV or a DC Brick power supply your amplifier. ™ • Rotate SENSITIVITY knob • Nashville studio standard Noise Floor* 95 dBV • Start with all controls at...
Need help?
Do you have a question about the M102 DYNA COMP and is the answer not in the manual?
Questions and answers