Land Pride Accuz Z52 , Z60, Z72 Operator's Manual page 43

Land Pride
Section 5 Specifications and Capacities
Mower Drive
Safety Features
Hand Operated Controls
Cutting Heights
Mowing Blades
Blade Tip Speed
Mainframe Construction
Drive motor mount
Caster wheels
Front caster forks
Deck Construction
ACCESSORIES
Mulch Kit
Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the grass. Reduces
handling of clippings, improves appearance, and recycles nutrients back into the soil.
Accu-Vac Collection System
Four blade impeller running off right hand deck spindle, 2 each 30 gallon rubber containers, 8.0 cu/ft. (10 bushel)
capacity, 6" reinforced hose, latched hood with gas filled lift support, three pin quick dismount of total unit, 100 lb. weight
kit. Adds 1 3/16" width to existing Accu-Z. Adds 24" to rear of Accu-Z. Accu-Vac length: 31", Width: 34", Height: 41 7/8"
Lift Jack Kit
Easy to mount screw jack to lift mower enough to perform blade removal/installation.
Weight Kit
100 lb. front weight kit standard with Accu-Vac Collection System.
03/11/03
General Specifications
Z52
Parking
Integral park brakes are automatically engaged when steering levers are placed in neutral.
Seat Standard: Molded-vinyl seat with armrests, forward adjustments, and reverse adjustment.
Optional: Molded-vinyl suspension seat with armrests, forward adjustments,
Cup Holder
Choke/throttle, ignition switch, electric mower clutch and Integrated parking brakes.
Indicators
Foot-operated deck height adjustment. Pin for setting height, transport position. Height
1/4" x 2 3/4" x 17.8"
16,647 FPM
Blade Drive
Spindles Machine ductile housing, 1" diameter high carbon steel shafts and sealed ball bearings. Cast
Flotation Suspended mower floats on four spring-assisted chains. 4 anti-scalp wheels are standard.
Deck Type Free-floating mower using three blades with center blade to the front. Mower is suspended at
the corners. Includes 6 deck-mounted anti-scalp rollers to improve flotation in rolling and
Deck Lift
1/8" welded steel. Solid 1" X 3/8" steel bars reinforce impact areas on trim edges. 3/16" x 3/8"
in box-section reinforced front edge. Reinforcements welded onto spindle mount areas. Steel
Z60
Automotive-style drum brakes.
Single V-belt with electric clutch and spring tension idler pulley
Operator presence system connected to deck and drive clutches.
Stabilizer rollers rear of tractor.
Reverse adjustments, and suspension adjustments.
Two cup holders molded into the left side fuel tank.
Accommodates nearly any cup size.
Hour meter
Engine warning light.
adjustment in 1/4" increments from 1" to 5"
Heavy-duty, heat-treated, high-lift steel blades
1/4" x 2 3/4" x 21"
18, 30 FPM
V-belt drive to all three spindles with spring tension idler pulleys.
ductile cast iron blade saddles with trash guard.
1.5" x 3" x 3/16" rectangular steel tubing.
3/16" welded steel
Mounted with roller bearings on each wheel.
1/2" steel.
uneven terrain.
Foot-operated deck height adjustment.
Pin for setting height, transport position.
deck housing is 5" deep to provide room for high-capacity mowing.
Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M
Z72
1/4" x 2 3/4" x 24"
18880 FPM
41