Gira temperature controller Installation Manual page 28

Setting the temperature limits
Two setting rings are found
in the setting knob. You
can set the temperature
limits as desired with them.
The temperature controller
is set to the maximum set-
ting range of 5 °C to 30 °C
at the factory.
Setting procedure
To set the temperature limits (in this example: min. 8 °C,
max. 23 °C):
1. Turn the setting knob to the centre of the desired
setting range.
Example: The centre between 8 °C und 23 °C is
15 °C.
2. Pull off setting knob.
28