Automatic Activation - Apeks QuantumX Owner's Manual

Automatic Activation

At the top of the QuantumX are two water contacts. When the water contacts are
submerged, the computer automatically enters Dive
Mode. The automatic activation features works when
the QuantumX is in any of its surface modes except for
PC Transfer Mode.
WARNING: The QuantumX cannot enter Dive
Mode while in PC Transfer Mode. You must exit
PC Transfer Mode before attempting to dive.
Otherwise, the computer will not perform any
nitrogen or oxygen calculations, which may lead to serious injury or death.
Testing the water contacts
You can test this feature by wetting your finger and
touching the water contacts. The word "WATER"
should appear in the dot matrix display. If "WATER"
does not appear, it is possible that the contact needs
to be cleaned. You can clean the contact with warm,
soapy water and a soft-bristle brush.
QuantumX Owner's Manual
Water Contacts
Water Contacts Active
35