Table of Contents
Advertisement
Playing in "a," "i," "u," "e," and "o" mode
The 5 [A] to [O] buttons arranged on a curve allow you to produce
the sounds "a, " "i, " "u, " "e" and "o" in real time as you play.
* There may be a slight delay before the actual sound changes after a button is
pressed.
Playing in "preset" mode
By pressing any of the buttons [A] to [O] while holding down the
[SHIFT] button, you can select preset lyrics (see page 6).
By touching the carbon keyboard with your
stylus, the first character of the lyrics will
play, and by removing the stylus it will
proceed to the next character of the lyrics.
To return to the beginning of the lyrics, the
button used to select the lyrics must be
pressed again.
* If you hold down both the [SHIFT] key and one of
the [A] to [O] buttons simultaneously, the preset
lyrics of the selected key will be read to you.
* The same preset lyrics from the command [SHIFT]
+ [A] to [O] are also stored in [VIBRATO] + [A] to [O].
* By linking your device with the application, you
will be able to freely replace the aforementioned
preset lyrics. (See page 10.)
Applying vibrato
By pressing the
[VIBRATO] button while
touching the carbon
keyboard with your
stylus, you can apply
vibrato (a pulsating
change of pitch) to your
sound.
a
i
Press simultaneously
Applying a pitch bend
By holding [VIBRATO]
and pressing volume
up while running your
stylus along the carbon
keyboard, your pitch will
be raised by a half tone
for as long as the buttons
are pressed. Pressing
volume down will lower
the pitch by a half tone.
u
e
o
Press simultaneously
9
Advertisement
Table of Contents
