Pb Battery Program; Charging Of Pb Battery; Discharging Of Pb Battery - UltraPower UP120AC DUO Instruction Manual

PB BATTERY PROGRAM

This program is only suitable for charging Pb lead-acid battery with
nominal voltage from 2 to 20V, Pb lead-acid battery is a completely
different from NiMH/NiCD battery. These batteries can only deliver
current lower in comparison to their capacity. The same restriction
applies to the charging process consquently, the optimum charge
current can only be 1/10 of the capacity. Pb battery can not be used
for fast-charging. Please follow the instructions provided by the
battery manufacturer.

CHARGING OF PB BATTERY

-
+
DEC. INC.
Batt type Start
Stop Enter
Battery
Elapsed
Battery
voltage
time
type
Charge
current

DISCHARGING OF PB BATTERY

- +
DEC. INC.
Batt type Start
Stop Enter
Set up the charge current on the left and
nominal voltage on the right. Range of
current 0.1-10.0A, the voltage should match
the battery being charged. Press
- +
DEC. INC.
START/ENTER button for more than 3
seconds to start charging.
>3 seconds
The screen display the real-time charging
status. Press START/ENTER button again
to store the parameter value you set. Press
BATT TYPE/STOP button to end the
Charged
capacity
program.
Set up the discharge current on the left and
nominal voltage on the right. Range of
discharge current is 0.1-5.0A, the voltage
- +
should match the battery being discharged.
DEC. INC.
Press ENTER/START button for more than
>3 seconds 3 seconds to start discharging.
18